TDS714L

From TekWiki
Jump to navigation Jump to search
Tektronix TDS714L
4-ch 500 MHz, 500 MS/s digital scope
Tektronix TDS714L

Produced from 1995? to 1998?

Manuals

Common

TDS714L

(All manuals in PDF format unless noted otherwise)
Manuals – Specifications – Links – Pictures

The Tektronix TDS714L is a 4 channel 500 MHz, 500 MS/s digital storage scope with a color screen.
The TDS714L is compatible with the Iomega Zip and Zip Plus Drive.

Key Specifications

Bandwidth 500 MHz
Sample rate 1 or 2 channels @ 500 MS/s
Number of Channels 4
Vertical Sensitivity 1 mV to 10 V/div with calibrated fine adjustment
Resolution 8 bit
Time Base Range 500 ps to 10 s/div
Record length 250K samples on 1 or two channels, 130K on 3 or 4 channels
Record Length (2M Option only) 8 M points on 1 channel; 4 M points on 2 channels ; 2 M points on 3 or 4 channels
Acquisition modes sample, envelope, average, high-resolution, peak-detect
Display Color; Zoom
Trigger modes Edge, logic, pulse; Video trigger with option 05 (NTSC, SECAM, PAL, HDTV, and FlexFormat)
Storage 1.44 Mbyte, 3.5 inch, DOS 3.3-or-later floppy disk. NVRAM storage for saving waveforms, hardcopies, and setups. Units with option HD present (requires additional hardware) have a hard disk drive
I/O Full GPIB programmability
Hardcopy Using GPIB, RS-232, or Centronics ports, also compatible with Zip 100/250 disk drives

Software


Firmware

Options

  • 05 - Video Trigger - Oscilloscope comes with tools that allow investigation of a range of NTSC, PAL, SECAM, and high definition TV signals.
  • 13 - RS-232C and Centronics hardcopy interfaces - Add RS-232-C and Centronics interface ports.
  • 1F - Floppy disk drive - Add 3.5 inch, 1.44 MByte floppy disc drive.
  • 2M - 8M acquisition length - To 2M samples on three or four channels, 4M on two channels, and 8M samples on one channel.
  • HD - Hard Disk - 170Mb internal hard disk drive.

Optional Accessories

  • 1K - Add K420 scope cart
  • 1R - Rackmount kit
  • 34 - P6247 differential probe
  • 35 - P6243 active probe
  • 36 - P6139A passive probe
  • C3 - Three years calibration
  • D1 - Calibration data report
  • D3 - Calibration data for C3

Standard Accessories

  • 071-0130-XX - User Manual with Programmers Manual Help Disk
  • 071-0628-XX - TDS714L Supplement
  • 020-2313-XX - Reference
  • 071-0630-XX - Technical Reference: Performance Verification and Specifications
  • P6139A - Probes: Four P6139A 10X, 500 MHz Passive probes
  • 200-3696-01 - Front Cover
  • 016-1268-00 - Accessory Pouch (only without Option 1R)
  • 161-0230-01 - U.S. Power Cord

Optional Accessories

  • 071-0627-XX - Service Manual
  • K420 - Oscilloscope Cart
  • 016-1236-00 - Rack Mount Kit (for field conversion)
  • 016-1268-00 - Accessory Pouch
  • 016-0909-01 - Soft-Sided Carrying Case
  • 016-1135-00 - Transit Case
  • 012-0991-01 - GPIB Cable (1 meter)
  • 012-0991-00 - GPIB Cable (2 meter)
  • 012-1214-00 - Centronics Cable
  • 012-1298-00 - RS-232 Cable

Links

See the Repairs page regarding HDD/FDD replacements.

Pictures

  • TDS714L Front

    TDS714L Front

  • TDS714L Rear

    TDS714L Rear

  • TDS714L 3/4 View

    TDS714L 3/4 View

  • TDS714L

    TDS714L

  • TDS714L

    TDS714L

  • TDS714L

    TDS714L

  • Option 05 Internal Parts

    Option 05 Internal Parts

  • Option HD Internal Parts, 2.5" Disk Version

    Option HD Internal Parts, 2.5" Disk Version

  • Option HD Internal Parts, PCMCIA Disk Version

    Option HD Internal Parts, PCMCIA Disk Version

Components

Some Parts Used in the TDS714L

Part Part Number(s) Class Description Used in
M377 165-2129-03 • 165-2089-06 • 155-2089-05 Monolithic integrated circuit amplifier 11A16 • 11A32 • 11A33 • 11A34 • 11A52 • 2245 • 2245A • 2247 • 2247A • 2252 • TDS410 • TDS420 • TDS460 • TDS520D • TDS540D • TDS580D • TDS680C • TDS684C • TDS714L • TDS724D • TDS754D • TDS784D
Retrieved from "https://w140.com/tekwiki/index.php?title=TDS714L&oldid=89281"