TekWiki

119-2000-0x

Revision as of 04:52, 14 February 2023 by Kurt (talk | contribs)

The 119-2000-0x attenuator module is used in the 11A32 and 11A34 plug-ins. The input supports Level 1 and Level 2 Tekprobe, non-Tekprobe probes, or 50-ohm BNC cables.

  • Four 119-2000-02 attenuators in an 11A34

    Four 119-2000-02 attenuators in an 11A34

  • 119-2000-00 attenuator, Peltola cable removed

    119-2000-00 attenuator, Peltola cable removed

  • Input connector

    Input connector

  • Relays

    Relays

  • Relays ‎

    Relays ‎

  • Relays

    Relays

  • Relay

    Relay

  • Relay contacts

    Relay contacts

  • Amplifie hybrid

    Amplifie hybrid

  • Amplifie hybrid ‎

    Amplifie hybrid ‎

  • Amplifie hybrid

    Amplifie hybrid

  • Connection between hybrids

    Connection between hybrids

  • Printed circuit board and flat flex cable

    Printed circuit board and flat flex cable

  • Laser trimming

    Laser trimming

  • Laser trimming ‎

    Laser trimming ‎

  • Laser trimming

    Laser trimming

  • Laser trimming

    Laser trimming

Retrieved from "https://w140.com/tekwiki/index.php?title=119-2000-0x&oldid=80216"