TDS714L
The Tektronix TDS714L is a 500 MHz, 500 MS/s DSO.
The TDS714L is compatible with the Iomega Zip and Zip Plus Drive.
Key Specifications
| Bandwidth | 500 MHz |
|---|---|
| Sample rate | 500 MS/s |
| Resolution | 8 bit |
| Record length | 250k samples per channel on 1 or 2 channels, 130k on 3 or 4 channels (Option 2M adds more) |
| Acquisition modes | sample, envelope, average, high-resolution, peak-detect |
| Display | Color; Zoom |
| Trigger modes | Edge, logic, pulse; Video trigger with option 05 (NTSC, SECAM, PAL, HDTV, and FlexFormat) |
| Storage | 1.44 Mbyte, 3.5 inch, DOS 3.3-or-later floppy disk. NVRAM storage for saving waveforms, hardcopies, and setups. Units with option HD present (requires additional hardware) have a hard disk drive Iomega Zip and Zip Plus Drive |
| I/O | Full GPIB programmability |
| Hardcopy | Using GPIB, RS-232, or Centronics ports |
Software
- Tektronix TDS300, 400, 500, 600, 700, 800 AWE Drivers 066-0087-00 (ZIP)
- TDS runtime Environment TDSRTE1 (ZIP)
- Telecom Test and I-Pattern Software TTiP 066-0119-00 (ZIP)
- Enhanced Printing Utility for TDS Family 066-0125-00 (ZIP)
- TDS runtime Environment TDSRTE1 066-0127-00 (ZIP)
- Tektronix TDS500C/700C Custom Masks 066-0165-00 (ZIP)
- Tektronix Wavestar 2012.05.09.11.07.29 16456 EN 066-0934-03 (ZIP, 102MB) Product Key: WSTRO618650124
Firmware
- TDS714L v7.1.1e Firmware (ZIP)
- TDS714L v7.2e Firmware (ZIP)
- TDS714L v7.4e Firmware (ZIP)
Options
- 05 - Video Trigger - Oscilloscope comes with tools that allow investigation of a range of NTSC, PAL, SECAM, and high definition TV signals.
- 13 - RS-232C and Centronics hardcopy interfaces - Add RS-232-C and Centronics interface ports.
- 1F - Floppy disk drive - Add 3.5 inch, 1.44 MByte floppy disc drive.
- 2M - 8M acquisition length - To 2M samples on three or four channels, 4M on two channels, and 8M samples on one channel.
- HD - Hard Disk - 170Mb internal hard disk drive.
Optional Accessories
- 1K - Add K420 scope cart
- 1R - Rackmount kit
- 34 - P6247 differential probe
- 35 - P6243 active probe
- 36 - P6139A passive probe
- C3 - Three years calibration
- D1 - Calibration data report
- D3 - Calibration data for C3
Standard Accessories
- 071-0130-XX - User Manual with Programmers Manual Help Disk
- 071-0628-XX - TDS714L Supplement
- 020-2313-XX - Reference
- 071-0630-XX - Technical Reference: Performance Verification and Specifications
- P6139A - Probes: Four P6139A 10X, 500 MHz Passive probes
- 200-3696-01 - Front Cover
- 016-1268-00 - Accessory Pouch (only without Option 1R)
- 161-0230-01 - U.S. Power Cord
Optional Accessories
- 071-0627-XX - Service Manual
- K420 - Oscilloscope Cart
- 016-1236-00 - Rack Mount Kit (for field conversion)
- 016-1268-00 - Accessory Pouch
- 016-0909-01 - Soft-Sided Carrying Case
- 016-1135-00 - Transit Case
- 012-0991-01 - GPIB Cable (1 meter)
- 012-0991-00 - GPIB Cable (2 meter)
- 012-1214-00 - Centronics Cable
- 012-1298-00 - RS-232 Cable
Pictures
-
TDS714L Front
-
TDS714L Rear
-
TDS714L 3/4 View
-
TDS714L
-
TDS714L
-
TDS714L
-
Option 05 Internal Parts
-
Option HD Internal Parts, 2.5" Disk Version
-
Option HD Internal Parts, PCMCIA Disk Version
