067-0544-00
The Tektronix 067-0544-00 is a calibration plug-in for the 647A which also works with the 647.
It was a redesign of the 10/11M1, which was designed for the 647.
The 035-5001-00 is most likely an engineering prototype.
Note from one of the manuals:
NOTE
The 10/11M1 was supposed to have been redesignated 067-0522-00 but it never happened. Instead, the 10/11M1 was redesigned for the 647A and will work just as well in the 647. The new design is called 067-0544-00 and it replaces the 10/11M1.John Mulway
Product Technical Information
January, 1967
The 067-0544-00 is shown on page 10 of the 1980 Calibration Fixtures Catalog.
10/11M1
The 10/11M1 was designed for use with the 547.
-
10/11M1 Front
-
10/11M1 Right Side
035-5001-00
Given the 035- prefix, this is likely an engineering prototype of the 067-0544-00.
-
035-5001-00 Front
-
035-5001-00 Left Side
-
035-5001-00 Right Side
067-0544-00
Latest version, redesigned to work with both the 647 and the 647A.
-
067-0544-00
-
067-0544-00 Catalog Photo
-
067-0544-00
