2440: Difference between revisions

3,206 bytes added ,  29 March
no edit summary
No edit summary
No edit summary
 
(49 intermediate revisions by 9 users not shown)
Line 1: Line 1:
{{Oscilloscope Sidebar|
{{Oscilloscope Sidebar  
title=Tektronix 2440 |
|manufacturer=Tektronix
image=2440_1.jpg |
|series=2400-series scopes
caption=Tektronix 2440  |
|model=2440  
introduced=1988 |
|image=2440_1.jpg  
discontinued=(?) |
|caption=Tektronix 2440   
summary=300 MHz, 500 MS/s 2-ch digital scope |
|introduced=1988  
manuals=
|discontinued=(?)  
* [http://w140.com/tek_2440_service.pdf Tektronix 2440 Manual (complete, B014064 and below) (PDF)]
|summary=300 MHz, 500 MS/s 2-ch digital scope  
* [http://w140.com/tek_2440_programmer_man.pdf Tektronix 2440 Programmer Manual (PDF)]
|designers=
* [http://w140.com/tek_2440.pdf Tektronix 2440 Manual (without schematics) (PDF)]
|manuals=
* [[Media:Tek-2430A-2432A-2440-catalog.pdf|2430A/2432A/2440 catalog page (PDF)]]
* [[Media:070-6599-00.pdf|Tektronix 2440 Operators Manual]]
* [[Media:070-6600-00.pdf|Tektronix 2440 User Reference]]
* [[Media:070-6601-00.pdf|Tektronix 2440 Programmer Manual]]
* [[Media:070-6602-00.pdf|Tektronix 2440 GPIB Pocket Guide]]
* [[Media:070-6603-00.pdf|Tektronix 2440 Service Manual (complete, B014064 and below)]]
 
* [https://w140.com/tek_2440.pdf Tektronix 2440 Service Manual (without schematics)]
* [[Media:2430A-2432A-2440-catalog.pdf|2430A/2432A/2440 catalog page]] (OCR)
}}
The '''Tektronix 2440''' is a two-channel 300 MHz, 500 MS/s digital sampling oscilloscope from the late 1980s.
 
It uses CCDs (essentially, analog shift registers) to store input samples at high speed and a single 8 bit flash A/D converter to digitize the time-multiplexed CCD output signals at 4 MS/s. 
 
<blockquote>
'''WARNING:'''<br />
Operation of the 2440, 2432, 2432A, 2430, and 2430A: A/D-converter and CCD hybrids may suffer irreparable damage within a few minutes if operated out of the metal enclosure without extra cooling.
</blockquote>
 
{{BeginSpecs}}
{{Spec | Bandwidth | 300 MHz (Limit: 20, 100, Full) }}
{{Spec | Rise time | 1.2 ns (Repeat on, 16×averaging)}}
{{Spec | Sampling rate | 500 MSa/s each channel with simultaneous acquisition }}
{{Spec | Sampling type | Real time: 100 ns/Div and slower, Equivalent time 50 ns/Div and faster}}
{{Spec | Single event bandwidth  | 200 MHz}}
{{Spec | Deflection | 2 mV/div to 5 V/div in 1-2-5 sequence }}
{{Spec | Resolution | 8 bit }}
{{Spec | Record length | 1024 samples }}
{{Spec | Auto scale factor | On-Screen Readout indicates probe tip deflection factors for ×1, ×10, ×100 and ×1000 probes }}
{{Spec | Input impedance| 1 MΩ // 15 pF or 50Ω }}
{{Spec | Sweep speeds | 2 ns/div to 5 s/div in 1-2-5 sequence (Modes A, A Intensified and B)}}
{{Spec | Auto measure| Simultaneously measures up to four parameters on one or more displayed waveforms, updated at 3 Hz intervals or display a snapshot of 20 parameters of waveform target }}
{{Spec | Acquisition modes| Normal, Envelope (glitch capture), Average }}
{{Spec | Display modes| CH1, CH2, invert, add, multiply, X-Y }}
{{Spec | Cursors  | Volts, Time, Volts At Time, 1/Time, Slope }}
{{Spec | Functions | A Mode - Auto Level, Auto/Roll, Normal and Single Seq; B Mode - Trigger After Delay, Runs After Delay, 1K Record Length and more }}
{{Spec | Interface | GPIB }}
{{Spec | Probes    | Two passive [[P6137]] 400 MHz ×10 voltage probes, 1.3 m }}
{{Spec | Power    | 90 to 132 V<sub>AC</sub> or 80 to 250 V<sub>AC</sub>, 48 to 440 Hz; 160 W }}
{{Spec | Features  |
* Autoprobe Function With [[P6137]] Probe
* 300 MHz X-Y bandwidth at probe tip
* Automatic measurements
* extensive triggering capabilities
* Printer/Plotter Output
* On-screen HELP text describing every front-panel control
}}
{{Spec | Options |
* 03 - Word Recognizer ([[P6407]])
* 05 - Video Waveform Measurement System
* 11 - Two [[LEMO S-series connector|probe-power connectors]] on the rear panel
}}
}}
The '''Tektronix 2440''' is a two-channel 300 MHz digital sampling oscilloscope from the late 1980s.
{{EndSpecs}}
The maximum sample rate is 500 megasamples per second, per channel
 
==Links==
* [https://hohlerde.org/rauch/en/elektronik/geraete/tek2440/  Tektronix 2440 internals & repair @ hohlerde.org]
 
==Internals==
The 2440 employs several processors − an [[Motorola 6809|MC68B09]] main CPU controls the instrument, a custom 16-bit waveform processor performs signal computations, and an [[Motorola 6805|MC6805]] microcontroller handles the front panel interface.  The GPIB Interface is implemented with a [[TMS9914]] controller.
 
The power supply consists of a buck-type pre-regulator followed by a push-pull inverter and linear post-regulators (except for the +5 V digital supply rail).
 
CRT is a [[154-0850-01]].


'''WARNING'''
==Pictures==
Tektronix 2440 mustn't running out of case without extra fan on AD-converter and CCD-unit.
<gallery>
It can damage by overheating.
Tek 2440 1.jpg
'''WARNING'''
Tek 2440 2.jpg
Tek 2440 3.jpg
Tek 2440 4.jpg
Tek 2440 5.jpg
Tek 2440 rear2.jpg
2440 1A.jpg
2440 1B.jpg
</gallery>


{{MissingSpecs}}
==Components==
{{Parts|2440}}


{{MissingPics}}




[[Category:2000 series scopes]]
[[Category:2400 series scopes]]
[[Category:Digital storage scopes]]
[[Category:Digital storage scopes]]


[[Category:GPIB interface]]
[[Category:GPIB interface]]
1,874

edits