3A3: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 11: | Line 11: | ||
* [http://bama.edebris.com/download/tek/3a3/3a3late.djvu Tektronix 3A3 Manual (late) (DjVu)] | * [http://bama.edebris.com/download/tek/3a3/3a3late.djvu Tektronix 3A3 Manual (late) (DjVu)] | ||
* [[Media:Tek 3a3 fcp june 1968.pdf|Tektronix 3A3 Factory Calibration Procedure, June 1968]] | * [[Media:Tek 3a3 fcp june 1968.pdf|Tektronix 3A3 Factory Calibration Procedure, June 1968]] | ||
* [[Media:Tek 3a3 cal outline.pdf|Tektronix 3A3 Calibration Outline (PDF, OCR)]] | |||
}} | }} | ||
The '''Tektronix 3A3''' is a dual trace differential amplifier for [[560-series scopes]]. | The '''Tektronix 3A3''' is a dual trace differential amplifier for [[560-series scopes]]. | ||
Revision as of 17:44, 3 May 2021
Template:Plugin Sidebar 2 The Tektronix 3A3 is a dual trace differential amplifier for 560-series scopes. It was designed by Roy Hayes.
Key Specifications
| Bandwidth | 500 kHz or 5 kHz (switch-selectable) |
|---|---|
| Deflection | 0.1 mV/Div to 10 V/Div, 1−2−5 |
| Input impedance | 1 MΩ // 47 pF |
Internals
Early 3A3s use a 7586 Nuvistor for the front end cathode follower. Serial numbers 4990 and up use a dual JFET.
Pictures
Older version (below SN 4990, Nuvistor in input stage)
-
Front
-
Right side
-
Left side
-
Nuvistor in input stage
Newer version (from SN 4990 up, FET in input stage)
-
Front
-
Right side
-
Left side
-
Top
-
Bottom
-
Dual JFET in input stage
