663
edits
5000 Series plug-in interface: Difference between revisions
m
Front
m (Columns swapped for consistency with 7k page. Reword top.) |
m (Front) |
||
| Line 1: | Line 1: | ||
'''[[5000-series scopes|Tektronix 5000 series oscilloscope mainframes]]''' have three plug-in slots; Two vertical and one horizontal. | '''[[5000-series scopes|Tektronix 5000 series oscilloscope mainframes]]''' have three plug-in slots; Two vertical and one horizontal. | ||
The interconnect on | The interconnect on each slot type is a 56-pin PCB edge connector with 5/32" pitch. | ||
Looking into the mainframe from the front panel, "A" pins are left of the connector centerline and "B" are on the right. Pins are numbered from 1 at the bottom to 28 on the top. | Looking into the mainframe from the front panel, "A" pins are left of the connector centerline and "B" are on the right. Pins are numbered from 1 at the bottom to 28 on the top. | ||
The table below shows the connections as if looking into the | The table below shows the connections as if looking into the mainframe from the front. | ||
{| class="wikitable" | {| class="wikitable" | ||
|+ Description of signals | |+ Description of signals | ||