543: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 22: Line 22:


<gallery>
<gallery>
Image:RM543B_1.JPG|RM543B
Image:RM543B_2.JPG|RM543B side
File:Tek_543b.jpg|543B
File:Tek 543 b 2.jpg|543B
File:Tek 543 front.jpg|543
File:Tek 543 front.jpg|543
File:Tek 543 top2.jpg|543
File:Tek 543 top2.jpg|543
Line 32: Line 28:
File:Tek 543 left.jpg|543
File:Tek 543 left.jpg|543
File:Tek 543 rear.jpg|543
File:Tek 543 rear.jpg|543
Image:RM543B_1.JPG|RM543B
Image:RM543B_2.JPG|RM543B side
File:Tek_543b.jpg|543B
File:Tek 543 b 2.jpg|543B
File:Tek-543 block.png|543 Block Diagram
File:Tek-543 block.png|543 Block Diagram
File:Tek-543 horizontal amp.png|543 Horizontal Amplifier
File:Tek-543 horizontal amp.png|543 Horizontal Amplifier

Revision as of 17:52, 3 July 2014

The Tektronix Type 543 is an all-tube 30MHz scope introduced in 1958. It takes letter-series and 1-series plug-ins. It is similar to a 545, but without the second, delayed timebase. Instead, it has a range of horizontal magnifiers from X2 to X100. It has the same six-stage balanced distributed amplifier (twelve 6DK6 tubes) as the 545. While the 545 has two non-calibrated X-input sensitivities, the 543 has an X-input with three calibrated selectable deflection sensitivities: 0.1V/cm, 1V/cm, and 10V/cm.

The standard CRT for the 543 is the T65 with P2 phosphor, part number 154-175. The standard CRT for the 543B is part number 154-0478-00, also known as the T5470-31-2.

The total acceleration voltage on the CRT is 10kV. The CRT power supply uses five 5642 HV tube diodes.

543B is a hybrid and vertical delay line have no 6DK6 and LC but 186 ohms delay line.