Microprocessor support table: Difference between revisions

Jump to navigation Jump to search

Microprocessor support table (view source)

Revision as of 22:29, 25 June 2020

20,299 bytes added ,  25 June 2020
→‎Tektronix DAS9200
(38 intermediate revisions by 3 users not shown)
Line 2: Line 2:
This is the Tektronix microprocessor support table. It gives the configurations for the cards, probes and software cartridges for disassembly of microprocessor instructions on Tektronix logic analyzers.
This is the Tektronix microprocessor support table. It gives the configurations for the cards, probes and software cartridges for disassembly of microprocessor instructions on Tektronix logic analyzers.


An "X" means that the option is not applicable, a "?" means that no information is available or it hasn't been found and "NA" means that the probe is not available.
A "X" means that the option is not applicable, a "?" means that no information is available or it hasn't been found and "NA" means that the probe is not available.


"Max" means that it supports the maximum speed fro the processor.
"Max" means that it supports the maximum speed for the processor.
==Tektronix [[1240]]/[[1241]]==
==Tektronix [[1240]]/[[1241]]==
Note:
Note:
*All acquisition boards are [[1240D2]] the [[1240D1]] cannot be used.  
*All acquisition boards are [[1240D2]] the [[1240D1]] cannot be used.  
*The [[UPIK 40]] harness is not required. If it is listed it means that it is supported.
*If the [[UPIK 40]] harness is listed it means that it is supported, but not required.
*(*1) means that [[P6460]] probes are always required.
*(*1) means that [[P6460]] probes are always required.
*(*2) means that [[P6460]] probes are required for CMOS version.
*(*2) means that [[P6460]] probes are required for CMOS version.
*(*3) means that [[P6460]] or [[P6462]] probes can be used.
*(*3) means that [[P6460]] or [[P6462]] probes can be used.
*PM2XX pods must be configured to have the right adapter and jumper settings depending on the IC and it's package.
{| class="wikitable"
{| class="wikitable"
! colspan="7" style="text-align: center; font-weight:bold;" | Tektronix [[1240]]/[[1241]] ROM pack and configuration table
! colspan="7" style="text-align: center; font-weight:bold;" | Tektronix [[1240]]/[[1241]] ROM pack and configuration table
Line 23: Line 24:
| style="text-decoration:underline;" | Fastest clock supported
| style="text-decoration:underline;" | Fastest clock supported
|-
|-
| colspan="7" style="font-style:italic;" | Intel
| colspan="7" style="font-style:italic; background-color:#efefef;" | Intel
|-
|-
| 8080
| 8080
Line 97: Line 98:
| style="text-align: center;" | 12 Mhz
| style="text-align: center;" | 12 Mhz
|-
|-
| colspan="7" style="font-style:italic;" | Motorola
| colspan="7" style="font-style:italic; background-color:#efefef;" | Motorola
|-
|-
| 6800
| 6800
Line 235: Line 236:
| style="text-align: center;" | 50 Mhz
| style="text-align: center;" | 50 Mhz
|-
|-
| colspan="7" style="font-style:italic;" | Zilog
| colspan="7" style="font-style:italic; background-color:#efefef;" | Zilog
|-
|-
| Z80
| Z80
Line 261: Line 262:
| style="text-align: center;" | 10 Mhz
| style="text-align: center;" | 10 Mhz
|-
|-
| colspan="7" style="font-style:italic;" | Texas instrument
| colspan="7" style="font-style:italic; background-color:#efefef;" | Texas Instruments
|-
|-
| TMS320320/320C25
| TMS320320/320C25
Line 297: Line 298:
| style="text-align: center;" | Max
| style="text-align: center;" | Max
|-
|-
| colspan="7" style="font-style:italic;" | Other microprocessors
| colspan="7" style="font-style:italic; background-color:#efefef;" | Other microprocessors
|-
|-
| 6502/C02
| 6502/C02
Line 355: Line 356:
| style="text-align: center;" | Max
| style="text-align: center;" | Max
|-
|-
| colspan="7" style="font-style:italic;" | Other
| colspan="7" style="font-style:italic; background-color:#efefef;" | Other
|-
|-
| VAXBI
| VAXBI
Line 375: Line 376:


==Tektronix [[1230]]==
==Tektronix [[1230]]==
The [[1230DPA]] is required for all DPXXXX probes.
* The [[1230DPA]] is required for all DPXXXX probes.
All acquisition boards are [[1230E1]].
* All acquisition boards are [[1230E1]].
All the software needs is included with the personality module.
* All of the needed software is included with the personality module.
{| class="wikitable"
{| class="wikitable"
! colspan="6" style="text-align: center; font-weight:bold;" | Tektronix 1230
! colspan="6" style="text-align: center; font-weight:bold;" | Tektronix 1230
Line 388: Line 389:
| style="text-decoration:underline;" | Fastest clock supported
| style="text-decoration:underline;" | Fastest clock supported
|-
|-
| colspan="6" style="font-style:italic;" | Intel
| colspan="6" style="font-style:italic; background-color:#efefef;" | Intel
|-
|-
| 8031/8051
| 8031/8051
Line 495: Line 496:
| style="text-align: center;" | 16 Mhz
| style="text-align: center;" | 16 Mhz
|-
|-
| colspan="6" style="font-style:italic;" | Motorola
| colspan="6" style="font-style:italic; background-color:#efefef;" | Motorola
|-
|-
| 6800
| 6800
Line 560: Line 561:
| style="text-align: center;" | 16 Mhz
| style="text-align: center;" | 16 Mhz
|-
|-
| Zilog
| colspan="6" style="font-style:italic; background-color:#efefef;" | Zilog
| style="text-align: center;" |
| style="text-align: center;" |
| style="text-align: center;" |
| style="text-align: center;" |
| style="text-align: center;" |  
|-
|-
| Z80
| Z80
Line 574: Line 570:
| style="text-align: center;" | Max
| style="text-align: center;" | Max
|-
|-
| colspan="6" style="font-style:italic;" | Other Microprocessors
| colspan="6" style="font-style:italic; background-color:#efefef;" | Other Microprocessors
|-
|-
| 6502/C02
| 6502/C02
Line 583: Line 579:
| style="text-align: center;" | Max
| style="text-align: center;" | Max
|-
|-
| colspan="6" style="font-style:italic;" | Other
| colspan="6" style="font-style:italic; background-color:#efefef;" | Other
|-
|-
| STD
| STD
Line 611: Line 607:
The internal hardware is different enough that the [[1225]]/[[1220]] can only use external probes. Since the personality modules are the probes the analyzer does not need any acquisition probes.
The internal hardware is different enough that the [[1225]]/[[1220]] can only use external probes. Since the personality modules are the probes the analyzer does not need any acquisition probes.
{| class="wikitable"
{| class="wikitable"
! colspan="4" style="text-align: center; font-weight:bold;" | Tektronix [[1225]]/[[1220]]
! colspan="3" style="text-align: center; font-weight:bold;" | Tektronix [[1225]]/[[1220]]
|-
|-
| style="text-decoration:underline;" | Micro- Processor
| style="text-decoration:underline;" | Micro- Processor
| style="text-decoration:underline;" | IC package
| style="text-decoration:underline;" | Probe adapter
| style="text-decoration:underline;" | Probe adapter
| style="text-decoration:underline;" | Fastest clock supported
| style="text-decoration:underline;" | Fastest clock supported
|-
|-
| colspan="4" style="font-style:italic;" | Intel
| colspan="4" style="font-style:italic; background-color:#efefef;" | Intel
|-
|-
| 8085
| 8085
|
| style="text-align: center;" | [[PM404]]
| style="text-align: center;" | [[PM404]]
| style="text-align: center;" | Max
| style="text-align: center;" | Max
|-
|-
| 8086
| 8086  
|
| style="text-align: center;" | [[PM411]]
| style="text-align: center;" | [[PM411]]
| style="text-align: center;" |  
| style="text-align: center;" |  
|-
|-
| 8088
| 8088  
|
| style="text-align: center;" | [[PM411]]
| style="text-align: center;" | [[PM411]]
| style="text-align: center;" |  
| style="text-align: center;" |  
|-
|-
| colspan="4" style="font-style:italic;" | Motorola
| colspan="4" style="font-style:italic; background-color:#efefef;" | Motorola
|-
|-
| 6800
| 6800  
|  
| style="text-align: center;" | [[PM407]]
| style="text-align: center;" |
|-
| 6802
| style="text-align: center;" | [[PM407]]
| style="text-align: center;" | [[PM407]]
| style="text-align: center;" |  
| style="text-align: center;" |  
|-
|-
| 6809
| 6809
|
| style="text-align: center;" | [[PM406]]
| style="text-align: center;" | [[PM406]]
| style="text-align: center;" | Max
| style="text-align: center;" | Max
|-
|-
| 6809E
| 6809E  
|
| style="text-align: center;" | [[PM406]]
| style="text-align: center;" | [[PM406]]
| style="text-align: center;" | Max
| style="text-align: center;" | Max
|-
|-
| 68000
| 68000  
|
| style="text-align: center;" | [[PM412]]
| style="text-align: center;" | [[PM412]]
| style="text-align: center;" |  
| style="text-align: center;" |  
|-
|-
| colspan="4" style="font-style:italic;" | Zilog
| colspan="4" style="font-style:italic; background-color:#efefef;" | Zilog
|-
|-
| Z80
| Z80  
|
| style="text-align: center;" | [[PM402]]
| style="text-align: center;" | [[PM402]]
| style="text-align: center;" | Max
| style="text-align: center;" | Max
|-
|-
| colspan="4" style="font-style:italic;" | Other Microprocessor
| colspan="4" style="font-style:italic; background-color:#efefef;" | Other Microprocessor
|-
|-
| 6502/C02
| 6502/C02  
|
| style="text-align: center;" | [[PM403]]
| style="text-align: center;" | [[PM403]]
| style="text-align: center;" | Max
| style="text-align: center;" | Max
|-
|-
| colspan="4" style="font-style:italic;" | Other
| colspan="4" style="font-style:italic; background-color:#efefef;" | Other
|-
|-
| STD
| STD  
|
| style="text-align: center;" | [[PM405]]
| style="text-align: center;" | [[PM405]]
| style="text-align: center;" | Max
| style="text-align: center;" | Max
Line 684: Line 673:
|-
|-
| style="text-decoration:underline;" | Micro- Processor
| style="text-decoration:underline;" | Micro- Processor
| style="text-decoration:underline;" | IC package
| style="text-decoration:underline;" | Probe adapter
| style="text-decoration:underline;" | Probe adapter
| style="text-decoration:underline;" | Acq. Boards required
| style="text-decoration:underline;" | Acq. Boards required
Line 690: Line 678:
| style="text-decoration:underline;" | Fastest clock supported
| style="text-decoration:underline;" | Fastest clock supported
|-
|-
| colspan="6" style="font-style:italic;" | Zilog
| colspan="6" style="font-style:italic; background-color:#efefef;" | Zilog
|-
|-
| Z80
| Z80
|
| style="text-align: center;" | [[PM302]]
| style="text-align: center;" | [[PM302]]
| style="text-align: center;" | X
| style="text-align: center;" | X
Line 699: Line 686:
| style="text-align: center;" | 4 Mhz
| style="text-align: center;" | 4 Mhz
|-
|-
| colspan="6" style="font-style:italic;" | Other
| colspan="6" style="font-style:italic; background-color:#efefef;" | Other
|-
|-
| 6502/C02
| 6502/C02  
|
| style="text-align: center;" | [[PM303]]
| style="text-align: center;" | [[PM303]]
| style="text-align: center;" | X
| style="text-align: center;" | X
Line 708: Line 694:
| style="text-align: center;" | 4 Mhz
| style="text-align: center;" | 4 Mhz
|-
|-
| General
| General  
|
| style="text-align: center;" | [[PM301]]
| style="text-align: center;" | [[PM301]]
| style="text-align: center;" | X
| style="text-align: center;" | X
Line 715: Line 700:
| style="text-align: center;" | 4 Mhz
| style="text-align: center;" | 4 Mhz
|}
|}
==Tektronix [[7D02]]==
==Tektronix [[7D02]]==
Note:
Note:
* The [[PM101]] is a general purpose probe, it can be defined to work with processors not listed here.
* "FM" stands for Full mnemonic disassembly.
* "FM" stands for Full mnemonic disassembly.
* "STD" stands for Standard radices (Hex, Bin, Octal).
* "STD" stands for Standard radices (Hex, Bin, Octal).
{| class="wikitable"
{| class="wikitable"
! colspan="5" style="text-align: center; font-weight:bold;" | Tektronix [[7D02]]
! colspan="5" style="text-align: center; font-weight:bold; background-color:#efefef;" | Tektronix [[7D02]]
|-
|-
| style="text-decoration:underline;" | Micro- Processor
| style="text-decoration:underline;" | Micro- Processor
Line 728: Line 715:
| style="text-decoration:underline;" | Fastest clock supported
| style="text-decoration:underline;" | Fastest clock supported
|-
|-
| colspan="5" style="font-style:italic;" | Intel
| colspan="5" style="font-style:italic; background-color:#efefef;" | Intel
|-
|-
| 8031
| 8031
| style="text-align: center;" | STD
| style="text-align: center;" | STD
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[061-6003-00]] Application manual
| style="text-align: center;" | [[Media:061-6003-00.pdf|061-6003-00]] Application manual
| style="text-align: center;" | ?
| style="text-align: center;" | 20 Mhz
|-
|-
| 8035
| 8035
| style="text-align: center;" | STD
| style="text-align: center;" | STD
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[061-5999-00]] Application manual
| style="text-align: center;" | [[Media:061-5999-00.pdf|061-5999-00]] Application manual
| style="text-align: center;" | ?
| style="text-align: center;" | 20 Mhz
|-
|-
| 8039
| 8039
| style="text-align: center;" | STD
| style="text-align: center;" | STD
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[061-5999-00]] Application manual
| style="text-align: center;" | [[Media:061-5999-00.pdf|061-5999-00]] Application manual
| style="text-align: center;" | ?
| style="text-align: center;" | 20 Mhz
|-
|-
| 8048
| 8048
| style="text-align: center;" | STD
| style="text-align: center;" | STD
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[061-5999-00]] Application manual
| style="text-align: center;" | [[Media:061-5999-00.pdf|061-5999-00]] Application manual
| style="text-align: center;" | ?
| style="text-align: center;" | 20 Mhz
|-
|-
| 8049
| 8049
| style="text-align: center;" | STD
| style="text-align: center;" | STD
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[061-5999-00]] Application manual
| style="text-align: center;" | [[Media:061-5999-00.pdf|061-5999-00]] Application manual
| style="text-align: center;" | ?
| style="text-align: center;" | 20 Mhz
|-
|-
| 8051
| 8051
| style="text-align: center;" | STD
| style="text-align: center;" | STD
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[061-6003-00]] Application manual
| style="text-align: center;" | [[Media:061-6003-00.pdf|061-6003-00]] Application manual
| style="text-align: center;" | ?
| style="text-align: center;" | 20 Mhz
|-
|-
| 8080
| 8080
Line 770: Line 757:
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | PM101 Opt 01
| style="text-align: center;" | PM101 Opt 01
| style="text-align: center;" | ?
| style="text-align: center;" | 20 Mhz
|-
|-
| 8085
| 8085
Line 793: Line 780:
| style="text-align: center;" | STD
| style="text-align: center;" | STD
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[061-5999-00]] Application manual
| style="text-align: center;" | [[Media:061-5999-00.pdf|061-5999-00]] Application manual
| style="text-align: center;" | ?
| style="text-align: center;" | 20 Mhz
|-
|-
| 8751
| 8751
| style="text-align: center;" | STD
| style="text-align: center;" | STD
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[061-6003-00]] Application manual
| style="text-align: center;" | [[Media:061-6003-00.pdf|061-6003-00]] Application manual
| style="text-align: center;" | ?
| style="text-align: center;" | 20 Mhz
|-
|-
| colspan="5" style="font-style:italic;" | Motorola
| colspan="5" style="font-style:italic; background-color:#efefef;" | Motorola
|-
|-
| 6800
| 6800
Line 813: Line 800:
| style="text-align: center;" | STD
| style="text-align: center;" | STD
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[061-6000-00]] Application manual
| style="text-align: center;" | [[Media:061-6000-00.pdf|061-6000-00]] Application manual
| style="text-align: center;" | ?
| style="text-align: center;" | 20 Mhz
|-
|-
| 6802
| 6802
Line 825: Line 812:
| style="text-align: center;" | STD
| style="text-align: center;" | STD
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[061-6000-00]] Application manual
| style="text-align: center;" | [[Media:061-6000-00.pdf|061-6000-00]] Application manual
| style="text-align: center;" | ?
| style="text-align: center;" | 20 Mhz
|-
|-
| 6808
| 6808
Line 852: Line 839:
| style="text-align: center;" | 10 Mhz
| style="text-align: center;" | 10 Mhz
|-
|-
| Zilog
| colspan="5" style="font-style:italic; background-color:#efefef;" | Zilog
| style="text-align: center;" |
| style="text-align: center;" |
| style="text-align: center;" |
| style="text-align: center;" |  
|-
|-
| Z80
| Z80
Line 876: Line 859:
| style="text-align: center;" | 4 Mhz
| style="text-align: center;" | 4 Mhz
|-
|-
| colspan="5" style="font-style:italic;" | Texas Instrument
| colspan="5" style="font-style:italic; background-color:#efefef;" | Texas Instruments
|-
|-
| TMS9900
| TMS9900
| style="text-align: center;" | STD
| style="text-align: center;" | STD
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[Media:061-6002-00.pdf|061-6002-00]] Application manual
| style="text-align: center;" | 20 Mhz
|-
| colspan="5" style="font-style:italic; background-color:#efefef;" | Other microproscessor
|-
| 1802
| style="text-align: center;" | STD
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[Media:061-6001-00.pdf|061-6001-00]] Application manual
| style="text-align: center;" | 20 Mhz
|-
| 6502
| style="text-align: center;" | FM
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | PM101 Opt 02
| style="text-align: center;" | 20 Mhz
|-
| colspan="5" style="font-style:italic; background-color:#efefef;" | Other
|-
| MULTIBUS
| style="text-align: center;" | STD
| style="text-align: center;" | [[PM112]]
| style="text-align: center;" | X
| style="text-align: center;" | 5 Mhz
|}
==Tektronix [[DAS9100]]==
See [[91TMXX tapes]] for information on tapes.
Note:
*All acquisition boards are either [[91A24]] or [[91AE24]].
*If the [[UPIK 40]] harness is listed it means that it is supported, but not required.
*(*1) means that [[P6460]] probes are always required.
*(*2) means that [[P6460]] probes are required for CMOS version.
*(*3) means that [[P6460]] or [[P6462]] probes can be used.
*PM2XX pods must be configured to have the right adapter and jumper settings depending on the IC and it's package.
It is also possible for the user to create mnemonics tables, using the Mnemonics menu.
* [[Media:DAS_9100_Series_Operators_Section_7_update.pdf|DAS 9100 Operator's Manual Section 7 update (PDF, OCR)]]
<!--Page 52 of 1982 catalogue-->
<!--Page 63 of 1983 catalogue-->
<!--Page 83 of 1984 catalogue-->
<!--Page 126 of 1987 catalogue-->
{| class="wikitable"
{| class="wikitable"
! colspan="7" style="text-align: center; background-color:#efefef;" | Tektronix [[DAS9100]]
|-
| style="text-decoration:underline;" | Micro-Processor
| style="text-decoration:underline;" | IC package
| style="text-decoration:underline;" | ROM tape
| style="text-decoration:underline;" | Probe adapter
| style="text-decoration:underline;" | Acq.Boards required
| style="text-decoration:underline;" | Acq.Probes required
| style="text-decoration:underline;" | Fastest clocksupported
|-
| colspan="7" style="font-style:italic; background-color:#efefef;" | Intel
|-
| 8080
|
| style="text-align: center;" | [[91TM01]]
| style="text-align: center;" | X
| style="text-align: center;" | 2
| style="text-align: center;" | 4*3
| style="text-align: center;" | Max
|-
| 8031
|
| style="text-align: center;" | [[91TM07]]
| style="text-align: center;" | X
| style="text-align: center;" | 2
| style="text-align: center;" | 4*1
| style="text-align: center;" | Max
|-
| 8039
|
| style="text-align: center;" | [[91TM10]]
| style="text-align: center;" | X
| style="text-align: center;" | 1
| style="text-align: center;" | 3*1
| style="text-align: center;" | Max
|-
| 8085
|
| style="text-align: center;" | [[91TM02]]
| style="text-align: center;" | X
| style="text-align: center;" | 2
| style="text-align: center;" | 4*3
| style="text-align: center;" | Max
|-
| 8086
| DIP
| style="text-align: center;" | [[91TM03]]
| style="text-align: center;" | [[PM201]]
| style="text-align: center;" | 2
| style="text-align: center;" | X
| style="text-align: center;" | 10 Mhz
|-
| 8088
| DIP
| style="text-align: center;" | [[91TM04]]
| style="text-align: center;" | [[PM201]]
| style="text-align: center;" | 2
| style="text-align: center;" | X
| style="text-align: center;" | 10 Mhz
|-
| 80186
| LCC
| style="text-align: center;" | [[91TM05]]
| style="text-align: center;" | [[PM202]]
| style="text-align: center;" | 2
| style="text-align: center;" | X
| style="text-align: center;" | 10 Mhz
|-
| 80188
| LCC
| style="text-align: center;" | [[91TM06]]
| style="text-align: center;" | [[PM202]]
| style="text-align: center;" | 2
| style="text-align: center;" | X
| style="text-align: center;" | 10 Mhz
|-
| colspan="7" style="font-style:italic; background-color:#efefef;" | Motorola
|-
| 6800
|
| style="text-align: center;" | [[91TM21]]
| style="text-align: center;" | X
| style="text-align: center;" | 2
| style="text-align: center;" | 4*3
| style="text-align: center;" | Max
|-
| 6801
|
| style="text-align: center;" | [[91TM28]]
| style="text-align: center;" | X
| style="text-align: center;" | 2
| style="text-align: center;" | 4*3
| style="text-align: center;" | Max
|-
| 6802
|
| style="text-align: center;" | [[91TM22]]
| style="text-align: center;" | X
| style="text-align: center;" | 2
| style="text-align: center;" | 4*3
| style="text-align: center;" | Max
|-
| 6803
|
| style="text-align: center;" | [[91TM29]]
| style="text-align: center;" | X
| style="text-align: center;" | 2
| style="text-align: center;" | 4*3
| style="text-align: center;" | Max
|-
| 6805
|
| style="text-align: center;" | [[91TM30]]
| style="text-align: center;" | [[UPIK40]]
| style="text-align: center;" | 2
| style="text-align: center;" | 4*2
| style="text-align: center;" | Max
|-
| 6808
|
| style="text-align: center;" | [[91TM23]]
| style="text-align: center;" | X
| style="text-align: center;" | 2
| style="text-align: center;" | 4*3
| style="text-align: center;" | Max
|-
| 6809
|
| style="text-align: center;" | [[91TM24]]
| style="text-align: center;" | X
| style="text-align: center;" | 2
| style="text-align: center;" | 4*3
| style="text-align: center;" | Max
|-
| 68121
|
| style="text-align: center;" | [[91TM32]]
| style="text-align: center;" | X
| style="text-align: center;" | 2
| style="text-align: center;" | 4*3
| style="text-align: center;" | Max
|-
| 68000
| DIP
| style="text-align: center;" | [[91TM25]]
| style="text-align: center;" | [[PM203]]
| style="text-align: center;" | 2
| style="text-align: center;" | None
| style="text-align: center;" | 12.5 Mhz
|-
| 68000
| PGA
| style="text-align: center;" | [[91TM25]]
| style="text-align: center;" | [[PM203]]
| style="text-align: center;" | 2
| style="text-align: center;" | None
| style="text-align: center;" | 12.5 Mhz
|-
| 68008
| DIP
| style="text-align: center;" | [[91TM26]]
| style="text-align: center;" | [[PM203]]
| style="text-align: center;" | 2
| style="text-align: center;" | None
| style="text-align: center;" | 8 Mhz
|-
| 68010
| DIP
| style="text-align: center;" | [[91TM27]]
| style="text-align: center;" | [[PM203]]
| style="text-align: center;" | 2
| style="text-align: center;" | None
| style="text-align: center;" | 12.5 Mhz
|-
| 68010
| PGA
| style="text-align: center;" | [[91TM27]]
| style="text-align: center;" | [[PM203]]
| style="text-align: center;" | 2
| style="text-align: center;" | None
| style="text-align: center;" | 12.5 Mhz
|-
| colspan="7" style="font-style:italic; background-color:#efefef;" | Zilog
|-
| Z80
|
| style="text-align: center;" | [[91TM41]]
| style="text-align: center;" | X
| style="text-align: center;" | 2
| style="text-align: center;" | 4*1
| style="text-align: center;" | Max
|-
| Z8001/3
|
| style="text-align: center;" | [[91TM42]]
| style="text-align: center;" | X
| style="text-align: center;" | 3
| style="text-align: center;" | 4*3
| style="text-align: center;" | Max
|-
| Z8002/4
|
| style="text-align: center;" | [[91TM43]]
| style="text-align: center;" | X
| style="text-align: center;" | 3
| style="text-align: center;" | 3*3
| style="text-align: center;" | Max
|-
| colspan="7" style="font-style:italic; background-color:#efefef;" | Other microprocessors
|-
| 6502/C02
|
| style="text-align: center;" | [[91TM63]]
| style="text-align: center;" | X
| style="text-align: center;" | 2
| style="text-align: center;" | 4*2
| style="text-align: center;" | Max
|-
| 1802
|
| style="text-align: center;" | [[91TM61]]
| style="text-align: center;" | X
| style="text-align: center;" | 2
| style="text-align: center;" | 4*2
| style="text-align: center;" | Max
|-
| 1803
|
| style="text-align: center;" | [[91TM65]]
| style="text-align: center;" | X
| style="text-align: center;" | 2
| style="text-align: center;" | 4*2
| style="text-align: center;" | Max
|-
| F9450
|
| style="text-align: center;" | [[91TM62]]
| style="text-align: center;" | X
| style="text-align: center;" | 2
| style="text-align: center;" | 3*3
| style="text-align: center;" | Max
|-
| MIL-Std 1705A
|
| style="text-align: center;" | [[91TM64]]
| style="text-align: center;" | X
| style="text-align: center;" | 2
| style="text-align: center;" | N/A
| style="text-align: center;" | N/A
|-
| NSC800
|
| style="text-align: center;" | [[91TM71]]
| style="text-align: center;" | X
| style="text-align: center;" | 2
| style="text-align: center;" | 4*1
| style="text-align: center;" | Max
|-
| colspan="7" style="font-style:italic; background-color:#efefef;" | BUS
|-
| UNIBUS
|
| style="text-align: center;" | [[91TM51]]
| style="text-align: center;" | X
| style="text-align: center;" | 2
| style="text-align: center;" | 4*3
| style="text-align: center;" | Max
|-
| Q-BUS
|
| style="text-align: center;" | [[91TM52]]
| style="text-align: center;" | X
| style="text-align: center;" | 2
| style="text-align: center;" | 4*3
| style="text-align: center;" | Max
|-
| QPIB
|
| style="text-align: center;" | [[91TM53]]
| style="text-align: center;" | X
| style="text-align: center;" | 1
| style="text-align: center;" | 3*3
| style="text-align: center;" | Max
|-
| ASCII
|
| style="text-align: center;" | [[91TM53]]
| style="text-align: center;" | X
| style="text-align: center;" | 1
| style="text-align: center;" | 3*3
| style="text-align: center;" | Max
|-
| EBCDIC
|
| style="text-align: center;" | [[91TM53]]
| style="text-align: center;" | X
| style="text-align: center;" | 1
| style="text-align: center;" | 3*3
| style="text-align: center;" | Max
|}
The following table gives the configuration for the [[PMA 100]] card. It is an interface card for using PM1XX personality modules with the [[DAS9100]].
* FM stands for full mnemonic disassembly.
* CM stands for control mnemonics.
* STD stands for standard radices (hex, binary, octal).
* DM means that the mnemonics may be developed using DAS mnemonics.
{| class="wikitable"
! colspan="5" style="text-align: center; font-weight:bold; background-color:#efefef;" | [[DAS9100]] with [[PMA 100]]
|-
| style="text-decoration:underline;" | Micro-Processor
| style="text-decoration:underline;" | SupportFeature
| style="text-decoration:underline;" | Probe adapter
| style="text-decoration:underline;" | Requires
| style="text-decoration:underline;" | Fastest clocksupported
|-
| colspan="5" style="font-style:italic; background-color:#efefef;" | Intel
|-
| 8031
| style="text-align: center;" | STD, DM
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[061-6003-00]] Application manual
| style="text-align: center;" | ?
|-
| 8035
| style="text-align: center;" | STD, DM
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[061-5999-00]] Application manual
| style="text-align: center;" | ?
|-
| 8039
| style="text-align: center;" | STD, DM
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[061-5999-00]] Application manual
| style="text-align: center;" | ?
|-
| 8048
| style="text-align: center;" | STD, DM
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[061-5999-00]] Application manual
| style="text-align: center;" | ?
|-
| 8049
| style="text-align: center;" | STD, DM
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[061-5999-00]] Application manual
| style="text-align: center;" | ?
|-
| 8051
| style="text-align: center;" | STD, DM
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[061-6003-00]] Application manual
| style="text-align: center;" | ?
|-
| 8080
| style="text-align: center;" | FM, DM
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | PM101 Opt 01
| style="text-align: center;" | ?
|-
| 8085
| style="text-align: center;" | FM, DM
| style="text-align: center;" | [[PM104]]
| style="text-align: center;" | X
| style="text-align: center;" | 10 Mhz
|-
| 8086
| style="text-align: center;" | FM, DM
| style="text-align: center;" | [[PM106]]
| style="text-align: center;" | X
| style="text-align: center;" | 8 Mhz
|-
| 8088
| style="text-align: center;" | FM, DM
| style="text-align: center;" | [[PM107]]
| style="text-align: center;" | X
| style="text-align: center;" | 5 Mhz
|-
| 8748
| style="text-align: center;" | STD, DM
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[061-5999-00]] Application manual
| style="text-align: center;" | ?
|-
| 8751
| style="text-align: center;" | STD, DM
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[061-6003-00]] Application manual
| style="text-align: center;" | ?
|-
| colspan="5" style="font-style:italic; background-color:#efefef;" | Motorola
|-
| 6800
| style="text-align: center;" | FM, DM
| style="text-align: center;" | [[PM102]]
| style="text-align: center;" | X
| style="text-align: center;" | 2 Mhz
|-
| 6801
| style="text-align: center;" | STD, DM
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[061-6000-00]] Application manual
| style="text-align: center;" | ?
|-
| 6802
| style="text-align: center;" | FM, DM
| style="text-align: center;" | [[PM103]]
| style="text-align: center;" | X
| style="text-align: center;" | 6 Mhz
|-
| 6803
| style="text-align: center;" | STD, DM
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[061-6000-00]] Application manual
| style="text-align: center;" | ?
|-
| 6808
| style="text-align: center;" | FM, DM
| style="text-align: center;" | [[PM103]]
| style="text-align: center;" | X
| style="text-align: center;" | 6 Mhz
|-
| 6809
| style="text-align: center;" | FM, DM
| style="text-align: center;" | [[PM111]]
| style="text-align: center;" | X
| style="text-align: center;" | 8 Mhz
|-
| 6809E
| style="text-align: center;" | FM, DM
| style="text-align: center;" | [[PM111]]
| style="text-align: center;" | X
| style="text-align: center;" | 8 Mhz
|-
| 68000
| style="text-align: center;" | FM, DM
| style="text-align: center;" | [[PM109]]
| style="text-align: center;" | X
| style="text-align: center;" | 10 Mhz
|-
| colspan="5" style="font-style:italic; background-color:#efefef;" | Zilog
|-
| Z80
| style="text-align: center;" | FM, DM
| style="text-align: center;" | [[PM105]]
| style="text-align: center;" | X
| style="text-align: center;" | 6 Mhz
|-
| Z8001
| style="text-align: center;" | FM, DM
| style="text-align: center;" | [[PM110]]
| style="text-align: center;" | X
| style="text-align: center;" | 6 Mhz
|-
| Z8002
| style="text-align: center;" | FM, DM
| style="text-align: center;" | [[PM108]]
| style="text-align: center;" | X
| style="text-align: center;" | 4 Mhz
|-
| colspan="5" style="font-style:italic; background-color:#efefef;" | Texas Instruments
|-
| TMS9900
| style="text-align: center;" | STD, DM
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[061-6002-00]] Application manual
| style="text-align: center;" | [[061-6002-00]] Application manual
| style="text-align: center;" | ?
| style="text-align: center;" | ?
|-
|-
| colspan="5" style="font-style:italic;" | Other microproscessor
| colspan="5" style="font-style:italic; background-color:#efefef;" | Other microproscessor
|-
|-
| 1802
| 1802
| style="text-align: center;" | STD
| style="text-align: center;" | STD, DM
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[061-6001-00]] Application manual
| style="text-align: center;" | [[061-6001-00]] Application manual
Line 893: Line 1,384:
|-
|-
| 6502
| 6502
| style="text-align: center;" | FM
| style="text-align: center;" | FM, DM
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | [[PM101]]
| style="text-align: center;" | PM101 Opt 02
| style="text-align: center;" | PM101 Opt 02
| style="text-align: center;" | ?
|-
| colspan="5" style="font-style:italic; background-color:#efefef;" | BUS
|-
| MULTIBUS
| style="text-align: center;" | CM, STD, DM
| style="text-align: center;" | [[PM112]]
| style="text-align: center;" | X
| style="text-align: center;" | ?
| style="text-align: center;" | ?
|}
|}


==Tektronix [[DAS9200]]==
==Tektronix [[DAS9200]]==
==Tektronix [[DAS9100]]==
* (*1) [[92A60]] or [[92A90]] pobes can be used.
* (*2) Only [[92A90]] probes can be used.
{| class="wikitable"
! colspan="6" style="text-align: center; font-weight:bold; background-color:#efefef;" | Tetkronix [[DAS9200]]
|-
| style="text-decoration:underline;" | Micro-Processor
| style="text-decoration:underline;" | IC package
| style="text-decoration:underline;" | Software
| style="text-decoration:underline;" | Probe adapter
| style="text-decoration:underline;" | Probe required
| style="text-decoration:underline;" | Fastest clocksupported
|-
| colspan="6" style="font-style:italic;" | Intel
|-
| 8085
|
| style="text-align: center;" | [[92DM02]]
| style="text-align: center;" | [[92DM02]]
| style="text-align: center;" | *1
| style="text-align: center;" | Max
|-
| 8086
| DIP
| style="text-align: center;" | [[92DM03]]
| style="text-align: center;" | [[92DM03]]
| style="text-align: center;" | *1
| style="text-align: center;" | Max
|-
| 8088
| DIP
| style="text-align: center;" | [[92DM04]]
| style="text-align: center;" | [[92DM04]]
| style="text-align: center;" | *1
| style="text-align: center;" | Max
|-
| 80186
| LCC/PGA
| style="text-align: center;" | [[92DM05]]
| style="text-align: center;" | [[92DM05]]
| style="text-align: center;" | *1
| style="text-align: center;" | Max
|-
| 80188
| LCC/PGA
| style="text-align: center;" | [[92DM06]]
| style="text-align: center;" | [[92DM06]]
| style="text-align: center;" | *1
| style="text-align: center;" | Max
|-
| 80286
| LCC/PGA
| style="text-align: center;" | [[92DM08]]
| style="text-align: center;" | [[92DM08]]
| style="text-align: center;" | *1
| style="text-align: center;" | Max
|-
| 80386
|
| style="text-align: center;" | [[92DM09]]
| style="text-align: center;" | [[92DM09]]
| style="text-align: center;" | *2
| style="text-align: center;" | Max
|-
| colspan="6" style="font-style:italic; background-color:#efefef;" | Motorola
|-
| 6809
|
| style="text-align: center;" | [[92DM24]]
| style="text-align: center;" | [[92DM24]]
| style="text-align: center;" | *1
| style="text-align: center;" | Max
|-
| 6809E
|
| style="text-align: center;" | [[92DM24]]
| style="text-align: center;" | [[92DM24]]
| style="text-align: center;" | NA
| style="text-align: center;" | Max
|-
| 68000
| DIP
| style="text-align: center;" | [[92DM25]], or [[92DM27]]
| style="text-align: center;" | [[92DM25]], or [[92DM27]]
| style="text-align: center;" | *1
| style="text-align: center;" | Max
|-
| 68000
| PGA
| style="text-align: center;" | [[91TM27]]
| style="text-align: center;" | ?
| style="text-align: center;" | *1
| style="text-align: center;" | Max
|-
| 68010
| DIP
| style="text-align: center;" | [[92DM27]]
| style="text-align: center;" | [[92DM27]]
| style="text-align: center;" | *1
| style="text-align: center;" | Max
|-
| 68010
| PGA
| style="text-align: center;" | [[91TM27]]
| style="text-align: center;" | ?
| style="text-align: center;" | *1
| style="text-align: center;" | Max
|-
| 68020
|
| style="text-align: center;" | [[92DM31]]
| style="text-align: center;" | [[92DM31]]
| style="text-align: center;" | *2
| style="text-align: center;" | Max
|-
|-
| 68030
|
| style="text-align: center;" | [[92DM33]]
| style="text-align: center;" | [[92DM33]]
| style="text-align: center;" | ?
| style="text-align: center;" | ?
|-
| 68040
|
| style="text-align: center;" | ?
| style="text-align: center;" | ?
| style="text-align: center;" | ?
| style="text-align: center;" | ?
|-
| colspan="6" style="font-style:italic; background-color:#efefef;" | Zilog
|-
| Z80
|
| style="text-align: center;" | [[92DM41]]
| style="text-align: center;" | [[92DM41]]
| style="text-align: center;" | *1
| style="text-align: center;" | Max
|-
| colspan="6" style="font-style:italic; background-color:#efefef;" | Other microprocessors
|-
| F9450
|
| style="text-align: center;" | [[92DM64]]
| style="text-align: center;" | Use [[92DM64]] with option 13 for non-MMU, else use without.
| style="text-align: center;" | *1
| style="text-align: center;" | Max
|-
| 1705A
|
| style="text-align: center;" | [[92DM64]]
| style="text-align: center;" | Need adapter for emulator PIAs
| style="text-align: center;" | *1
| style="text-align: center;" | 40 Mhz
|}
 
[[Category:Logic analyzer personality modules]]
[[Category:ROM packs]]
Floopy
1,323

edits

Retrieved from "https://w140.com/tekwiki/wiki/Special:MobileDiff/44129...56254"

Navigation menu