1,875
edits
Pin Tip: Difference between revisions
split 40 and 80 mil variants, added pictures and links, added "used in" equipment
m (add 5D10 + note re smaller pins in 5k plugins) |
(split 40 and 80 mil variants, added pictures and links, added "used in" equipment) |
||
| Line 1: | Line 1: | ||
[[File:BU-4444-A-36-0-2.jpg|250px|thumb|right|Jumper cable with Pin Tip Plugs]] | [[File:BU-4444-A-36-0-2.jpg|250px|thumb|right|Jumper cable with 0.08" Pin Tip Plugs]] | ||
'''Pin Tip Plugs''' and '''Pin Tip Jacks''' | '''Pin Tip Plugs''' and '''Pin Tip Jacks''' are small dc connectors similar to [[banana connector|banana connectors]], however the pin does not bear any springs and is straight, requiring springs in the jack for good contact. Angled pin connectors are sometimes called meter pin connectors, since they were common in older (1960s) multimeters. | ||
Tektronix uses two variants, one with 0.080" (~2 mm) pin diameter and one with 0.040" (~1 mm) pin diameter. | |||
=0.08" Pin Diameter= | |||
==Modern Plug Sources== | ==Modern Plug Sources== | ||
* AM-Systems 521000 | * AM-Systems 521000 | ||
* E-Z-hook 9201 | * E-Z-hook 9201 | ||
* [https://e-z-hook.com/connectors-adapters/banana-plugs-sockets/9258-item/ E-Z-hook 9258] | |||
* Pomona 5173 | * Pomona 5173 | ||
==Modern Adapters== | |||
* [https://e-z-hook.com/connectors-adapters/banana-plugs-sockets/8031-item/ E-Z-hook 8031 banana socket to pin socket] | |||
==Used In== | ==Used In== | ||
* [[ | * [[5S14N]] | ||
* [[7L12]] | |||
* [[ | |||
* [[7S11]] | * [[7S11]] | ||
* [[7S12]] | * [[7S12]] | ||
* [[7S14]] | * [[7S14]] | ||
* [[7T11]] | * [[7T11]] | ||
=0.04" Pin Diameter= | |||
==Tektronix Cables== | |||
* [[012-0200-00|012-0200-00 Patch cord pinjack to pinjack (red)]] | |||
* [[012-0201-00]] Patch cord pinjack to pinjack (blue) | |||
* [[012-0202-00]] Patch cord pinjack to pinjack (black) | |||
* [[175-1178-00]] Pin jack to BNC adapter cable | |||
==Modern Plug Sources== | |||
* Cambion part number 460-3308-01-03-00 | |||
==Modern Adapters== | |||
* [https://e-z-hook.com/connectors-adapters/banana-plugs-sockets/9339-item/ E-Z-hook 9339 banana socket to pin plug] | |||
==Used In== | |||
* [[2601]] | |||
* most 3-bay [[7000-series scopes]] for calibrator output: [[7313]], [[7403]], [[7603]], [[7613]], [[7623]], [[7633]] | |||
* [[5B25N]] | |||
* [[5D10]] | |||
* [[5L4N]] | |||
* [[7D01]] | |||
* [[DF1]] / [[DF2]] | |||
* [[7D13]] | |||
* [[7D14]] | |||
* [[7D15]] | |||
* [[7L5]] | |||
* [[7L13]] | |||
* [[7L14]] | |||
* [[7L18]] | |||
* [[7V11]] | |||
* [[26A1]] | |||
* [[26A2]] | |||
* [[26G1]] | |||
* [[26G2]] | |||
* [[26G3]] | |||
* [[AFG5101]] | |||
* [[DC503A]] | |||
* [[DC509]] | |||
* [[DC510]] / [[DC5010]] | |||
* [[DM501]] | |||
* [[SA501]] | |||
* [[SG505]] Option 2 | |||
* [[SG5010]] | |||
* [[SI5010]] | |||
* [[SW503]] | |||
* [[WR501]] | |||
=Pictures= | |||
===0.08" Pin Diameter=== | |||
<gallery> | |||
7t11a_conn.jpg | 0.08" Pin tip jacks on [[7T11A]] next to [[SMA]] and [[BSM]] connector | |||
BU-4444-A-36-0-2.jpg|Jumper cable with 0.08" Pin Tip Plugs | |||
</gallery> | |||
===0.04" Pin Diameter=== | |||
<gallery> | |||
Tek 26g1 2.jpg | 0.04" Pin tip jacks on [[26G1]] | |||
Tek_012-0200-00_1.jpg | [[012-0200-00]] Patch cord pinjack to pinjack (red) | |||
Tek 175-1178-00.jpg |Tek [[175-1178-00]] Pin jack to BNC adapter cable | |||
</gallery> | |||
[[Category:Low-voltage connectors]] | [[Category:Low-voltage connectors]] | ||