S-4: Difference between revisions

S-4 (view source)

Revision as of 09:24, 17 April 2010

121 bytes added , 17 April 2010

m

no edit summary

GHz

119

edits

Revision as of 08:04, 16 December 2008 (view source) Randallw (talk \| contribs) No edit summary ← Older edit		Revision as of 09:24, 17 April 2010 (view source) GHz (talk \| contribs) mNo edit summary Newer edit →
Line 1:		Line 1:
	The S4 sampling plug-in head provides one 50-ohm SMA input port with a 25ps risetime and a bandwidth of 14.5GHz. The unit provides a trigger pickoff signal for internal triggering and is specified for less than 5mV of noise. The S4 is the fastest of the S-series plug-in samplers		The S4 sampling plug-in head provides one 50-ohm SMA input port with a 25ps risetime and a bandwidth of 14.5GHz. The unit provides a trigger pickoff signal for internal triggering and is specified for less than 5mV of noise. The S4 is the fastest of the S-series plug-in samplers. A interesting comparison of different sampling heads is found in "AN-3042a, Revision 1, 2/89" at WWW.PICOSECOND.COM.

	The S4 sampling gate is based upon a traveling wave trapped-charge transmission line in which the sampling window is set by the propagation time of pulse edge through a thick-film transmission line. This technique requires only a sharp pulse edge rather than a precise pulse width, which is harder to generate.		The S4 sampling gate is based upon a traveling wave trapped-charge transmission line in which the sampling window is set by the propagation time of pulse edge through a thick-film transmission line. This technique requires only a sharp pulse edge rather than a precise pulse width, which is harder to generate.