S-4: Difference between revisions

Jump to navigation Jump to search
401 bytes added ,  16 December 2008
no edit summary
No edit summary
No edit summary
Line 1: Line 1:
The S4 sampling plug-in head provides one 50-ohm SMA port with a 25ps risetime. The S4 provides a trigger pickoff signal for internal triggering and is specified for less than 5mV of noise.
The S4 sampling plug-in head provides one 50-ohm SMA input port with a 25ps risetime and a bandwidth of 14.5GHz. The unit provides a trigger pickoff signal for internal triggering and is specified for less than 5mV of noise. The S4 is the fastest of the S-series plug-in samplers


The S4 sampling gate is based upon a traveling wave trapped-charge transmission line in which the sampling window is set by the propagation time of pulse edge through a thick-film transmission line. This technique requires only a sharp pulse edge rather than a precise pulse width, which is harder to generate.
The sampling diodes are housed in a special coaxial connector that provides a high bandwidth signal path.
The sampling diodes are housed in a special coaxial connector that provides a high bandwidth signal path.
<gallery>
<gallery>
18

edits

Navigation menu