DataVu-PC

From TekWiki
Jump to navigation Jump to search
Tektronix DataVu-PC
DataVu-PC Recorded Signal Analysis Software
Tektronix DataVu-PC

Produced from (?) to (?)

Manuals
(All manuals in PDF format unless noted otherwise)
Manuals – Specifications – Links – Pictures

The DataVu-PC software makes easy work of recording and searching through large datasets for signals of interest. Users can measure, control, and record with two USB instruments simultaneously, then search for and measure pulses and other signals, minimizing time spent in post-capture analysis.

Should the user need to perform in-depth modulation, pulse or standards-based analysis, DataVu-PC can convert recordings to the SignalVu-PC file format (.TIQ), and can convert recordings made with Tektronix USB-based spectrum analyzers and SignalVu-PC from .R3F format into formats compatible with DataVu-PC.

Features & Benefits:

  • Enables easy recording for all Tektronix USB instruments, supporting up to 2 units operating simultaneously at independent frequencies and spans, recording at bandwidths from 9.7 kHz to 40 MHz
  • Instruments can be controlled, and spectrums displayed, at spans up to the maximum of the instrument frequency range for fast signal discovery over broad frequency ranges
  • Frequency-mask search finds events based on user-defined spectral profiles
  • Pulse analysis calculates start/stop time, average/peak power, pulse duration, Pulse Repetition Interval (PRI) and start/stop frequencies on up to 2,000,000 pulses
  • Pulse analysis results can be saved in Pulse Descriptor Word (PDW) format for use with other tools
  • File progress bar gives analysis position at a glance, with visual display of marker events
  • Provides analysis for all recording solutions (RSA300/500/600/5000/7100 series), minimizing time spent learning new tools
  • Color-graded spectrum density display visualizes infrequent signal occurrences, reducing analysis time
  • Color-graded spectrogram display shows time and frequency relationships
  • Power vs. time display provides streaming zero-span display for detailed pulse analysis
  • FFT overlap and speed controls optimize between highest probability of intercept vs. analysis time
  • User settable sliders for start/stop point saves time in re-examination of signals of interest
  • Export areas of interest to .XDAT, .SIQ or .TIQ formats for further analysis
  • eMarkers provide search, mark and save on up to 2,000,000 userdefined amplitude events
  • Analyzes files in .XDAT format from any source, including third-party recording solutions

This software applies to RSA306, RSA306B, RSA503A, RSA507A, RSA603A, RSA607A, RSA513A, RSA518A, and RSA7100A … actually to all RSA Spectrum Analyzers.

Video introductions and fundamentals can be found on the Tektronix YouTube channel:


Pictures