P6022
The Tektronix P6022 (010-0238-00) is a 50-turn AC current probe for oscilloscopes. It can be used with the included passive termination box (011-0106-00), a Type 134 current probe amplifier, or a 3A9 or 7A14 current probe amplifier scope plug-in.
Bandwidth is at least 200 MHz with the passive termination.
The sister model P6021 has lower bandwidth but also a lower LF cut-off frequency and higher peak current rating.
Note: There was apparently an older unrelated voltage probe, also called the P6022. That unrelated "P6022" probe is referenced in the 316 manual.
Specifications
| P6021 + 011-0105-00 passive termination | P6021 + 134 | P6021 + 7A14 | P6022 + 011-0106-00 passive termination | P6022 + 134 | P6022 + 7A14 | |
|---|---|---|---|---|---|---|
| Sensitivity | 2 mA/mV or 10 mA/mV | 1 mA/Div to 1 A/Div (scope @ 50 mV/Div) |
1 mA/Div to 1 A/Div | 1 mA/mV or 10 mA/mV | 1 mA/Div to 1 A/Div (scope @ 50 mV/Div) |
1 mA/Div to 1 A/Div |
| Bandwidth (–3 dB) | 60 MHz @ 10 mA/mV | > 40 MHz | 50 MHz | 200 MHz @ 10 mA/mV | > 70 MHz | 105 MHz |
| LF limit (–3 dB) | 450 Hz @ 2 mA/mV 120 Hz @ 10 mA/mV |
< 12 Hz | 25 Hz | 8500 Hz @ 1 mA/mV 935 Hz @ 10 mA/mV |
< 100 Hz | 250 Hz |
| Maximum current | 15 Ap-p | 6 Ap-p (> 10 kHz @ 1 mV/mA, > 3 kHz @ 10 mV/mA, < 10 MHz) | ||||
Links
Documents referencing P6022
| Document | Class | Title | Authors | Year | Links |
|---|---|---|---|---|---|
| Tekscope 1973 V5 N1 Jan 1973.pdf | Article | Repairing Oscilloscope Probes | 1973 | P6006 • P6021 • P6022 • P6042 |
Prices
| Year | Catalog price | In 2026 dollars |
|---|---|---|
| 1970 | $165 | ~$1,400 |
| 1974 | $175 | ~$1,200 |
| 1984 | $380 | ~$1,200 |
| 1986 | $475 | ~$1,400 |
Pictures
-
P6022 current probe with 011-0106-00 passive terminator
-
-
Schematic (click to enlarge)
Comparison of P6022 with passive termination @ 10 mA/Div (top trace) vs. P6021+134 (bottom trace). Signal is a sawtooth from a HP3325A @ 5 Vp-p into 50 Ω = 100 mAp-p.
-
100 Hz
-
1 kHz
-
10 kHz
