336: Difference between revisions

336 (view source)

Revision as of 14:21, 24 September 2016

876 bytes added , 24 September 2016

spectable

Marian

186

edits

@@ Line 22: / Line 22: @@
 Waveform acquisition is frame-based. Additional memory allows to store more frames, but not longer records. The digitizer works at 1 MS/s with approx 140 kHz of real-time bandwidth. Equivalent time sampling is supported, extending digital storage bandwidth to 50 MHz. Analog bandwidth is always 50 MHz.
-Maximum input: 200 V DC + peak AC / 200 Vpp AC
+X-Y mode with 1 MHz bandwidth. Phase difference is less than 3° to 50 kHz.
-Deflection is 5 mV/div to 10 V/div.
+{{BeginSpecs}}
+{{Spec | Bandwidth | 50 MHz in analog or digital equivalent sampling modes, ~140 kHz in real-time digital mode }}
-X-Y with 1 MHz bandwidth. Phase difference is less than 3° to 50 kHz. Z axis available.
+{{Spec | Deflection | 5 mV/Div to 10 V/Div in 1–2–5 sequence}}
+{{Spec | Input impedance | 1 MΩ || 33 pF }}
-CRT is 8x10 divisions at 0.6 cm/div, 12 kV acceleration.
+{{Spec | Maximum input | 200  V<sub>DC</sub> + V<sub>peak</sub> / 200 V<sub>p-p</sub> AC }}
+{{Spec | Sweep | 0.2 s/Div to 0.1 µs/Div in 1-2-5 sequence, &times;10 magnifier down to 10 ns/Div, variable to &times;2.5. Roll mode beyond 0.2 s/Div}}
-Weight is some 5 Kilos
+{{Spec | CRT | P31 phosphor, 8 &times; 10 divisions of 0.6 cm; 12 kV acceleration voltage}}
+{{Spec | Vertical modes | Ch 1 / Ch 2 / Chop / Dual / Trigger view (only in store mode)}}
+{{Spec | Trigger Source | Ch 1 / Ch 2 / Internal / Composite (video?) / External }}
+{{Spec | Inputs | Z Axis }}
+{{Spec | Outputs | Chart output (500 mV/Div), calibrator (0.3 V ± 1 %, 1 kHz) }}
+{{Spec | Line Voltage | 90-132 V, 180-250 V, 48—440 Hz }}
+{{Spec | Power | Max. 50 W  }}
+{{Spec | Weight | 5 kg }}
+{{Spec | Operating Environment | 0°C – +55°C, < 4,000 m}}
+{{EndSpecs}}
 {{MissingSpecs}}