34,075
edits
S-311: Difference between revisions
no edit summary
No edit summary |
No edit summary |
||
| Line 13: | Line 13: | ||
The [[567]] mainframe has holes in the plug-in bay bulkhead at the location | The [[567]] mainframe has holes in the plug-in bay bulkhead at the location | ||
of the signal input connectors and programming connector of the S-311. | of the signal input connectors and programming connector of the S-311. | ||
The remote programmability of the S-311 typically involves a Type [[262]] programmer. | |||
Remote programming can control the mV/div, voltage offset, and mode, | |||
i.e., channel A, channel B, or dual-trace. | |||
The Type 262 controls the DC currents in the coils of six reed relays in the S-311. | |||
The S-311 can be though of as an [[3S76]] with remote programmability, | The S-311 can be though of as an [[3S76]] with remote programmability, | ||
connectors on the rear, no delay, and no trigger pickoff. | connectors on the rear, no delay, and no trigger pickoff. | ||
Component numbers are the same in the two models. | |||
The S-311 and 3S76 both have 0.4 nanosecond risetimes. | The S-311 and 3S76 both have 0.4 nanosecond risetimes. | ||
The sampler in the S-311 uses four Tek-made GaAs diodes. | |||
The S-311 does not contain a signal delay. | The S-311 does not contain a signal delay. | ||