32,948
edits
No edit summary |
No edit summary |
||
Line 11: | Line 11: | ||
* [http://bama.edebris.com/download/tek/6r1/tek%206r1.v6.pdf Tektronix 6R1 Manual (PDF)] | * [http://bama.edebris.com/download/tek/6r1/tek%206r1.v6.pdf Tektronix 6R1 Manual (PDF)] | ||
}} | }} | ||
The '''Tektronix Type 6R1''' is a plug-in for the [[567]] oscilloscope. | The '''Tektronix Type 6R1''' is a plug-in for the [[567]] oscilloscope. | ||
It was later replaced by the [[6R1A]]. | |||
The 6R1 provides digital readout of time and voltage measurements on waveforms. | The 6R1 provides digital readout of time and voltage measurements on waveforms. | ||
The 6R1 (and the 567 in general) is oriented toward sampling measurements. | The 6R1 (and the 567 in general) is oriented toward sampling measurements. | ||
Line 60: | Line 61: | ||
== Board K: 0% ZONE == | == Board K: 0% ZONE == | ||
<gallery> | <gallery> | ||
6r1 board k top.jpg | |||
6r1 board k bottom.jpg | |||
6r1_board_k_outside.jpg | |||
6r1 0-percent zone schem.png | |||
</gallery> | </gallery> | ||
Line 88: | Line 89: | ||
== Board L: MEMORY == | == Board L: MEMORY == | ||
<gallery> | <gallery> | ||
6r1 board l top.jpg | |||
6r1 board l bottom.jpg | |||
6r1_board_l_outside.jpg | |||
6r1 memory schem.png | |||
</gallery> | </gallery> | ||
The 6R1 contains two MEMORY boards, one for vertical input A and one for vertical input B. | The 6R1 contains two MEMORY boards, one for vertical input A and one for vertical input B. | ||
Line 151: | Line 152: | ||
== Board A: COUNTER (6R1 has four of these) == | == Board A: COUNTER (6R1 has four of these) == | ||
<gallery> | <gallery> | ||
6r1 board a top.jpg | |||
6r1 board a bottom.jpg | |||
6r1_board_a_outside.jpg | |||
6r1 counter schem.png | |||
</gallery> | </gallery> | ||
Each COUNTER board contains four flip-flops and functions as one | Each COUNTER board contains four flip-flops and functions as one | ||
Line 167: | Line 168: | ||
== Board B: DIVIDE BY 1,2,5 == | == Board B: DIVIDE BY 1,2,5 == | ||
<gallery> | <gallery> | ||
6r1 board b top.jpg | |||
6r1 board b bottom.jpg | |||
6r1_board_b_outside.jpg | |||
6r1 divide by 1-2-5 schem.png | |||
</gallery> | </gallery> | ||
== Board C: MASTER GATE == | == Board C: MASTER GATE == | ||
<gallery> | <gallery> | ||
6r1 board c top.jpg | |||
6r1 board c bottom.jpg | |||
6r1_board_c_outside.jpg | |||
6r1 master gate schem.png | |||
</gallery> | </gallery> | ||
== Board D: SIGNAL COMPARATOR (6R1 has two of these) == | == Board D: SIGNAL COMPARATOR (6R1 has two of these) == | ||
<gallery> | <gallery> | ||
6r1 board d top.jpg | |||
6r1 board d bottom.jpg | |||
6r1_board_d_outside.jpg | |||
6r1 signal comparator schem.png | |||
</gallery> | </gallery> | ||
== Board E: VOLTMETER == | == Board E: VOLTMETER == | ||
<gallery> | <gallery> | ||
6r1 board e top.jpg | |||
6r1 board e bottom.jpg | |||
6r1_board_e_outside.jpg | |||
6r1 voltmeter schem.png | |||
</gallery> | </gallery> | ||
== Board F: UPPER LIMIT NO-GO == | == Board F: UPPER LIMIT NO-GO == | ||
<gallery> | <gallery> | ||
6r1 board f top.jpg | |||
6r1 board f bottom.jpg | |||
6r1_board_f_outside.jpg | |||
6r1 upper limit no-go schem.png | |||
</gallery> | </gallery> | ||
The UPPER LIMIT NO-GO circuit compares the current value of the four-digit decimal | The UPPER LIMIT NO-GO circuit compares the current value of the four-digit decimal | ||
Line 207: | Line 208: | ||
== Board G: LOWER LIMIT NO-GO == | == Board G: LOWER LIMIT NO-GO == | ||
<gallery> | <gallery> | ||
6r1 board g top.jpg | |||
6r1 board g bottom.jpg | |||
6r1_board_g_outside.jpg | |||
6r1 lower limit no-go schem.png | |||
</gallery> | </gallery> | ||
The LOWER LIMIT NO-GO circuit compares the current value of the | The LOWER LIMIT NO-GO circuit compares the current value of the | ||
Line 220: | Line 221: | ||
== Board H: LIMIT LIGHT DRIVER == | == Board H: LIMIT LIGHT DRIVER == | ||
<gallery> | <gallery> | ||
6r1 board h top.jpg | |||
6r1 board h bottom.jpg | |||
6r1_board_h_outside.jpg | |||
6r1 limit light driver schem.png | |||
</gallery> | </gallery> | ||
The LIMIT LIGHT DRIVER board gets inputs from the LOWER LIMIT NO-GO board and the | The LIMIT LIGHT DRIVER board gets inputs from the LOWER LIMIT NO-GO board and the | ||
Line 236: | Line 237: | ||
== Board I: DIVIDE BY 10 == | == Board I: DIVIDE BY 10 == | ||
<gallery> | <gallery> | ||
6r1 board i top.jpg | |||
6r1 board i bottom.jpg | |||
6r1_board_i_outside.jpg | |||
6r1 divide by 10 schem.png | |||
</gallery> | </gallery> | ||
== Board J: ANALOG DISPLAY == | == Board J: ANALOG DISPLAY == | ||
<gallery> | <gallery> | ||
6r1 board j top.jpg | |||
6r1 board j bottom.jpg | |||
6r1_board_j_outside.jpg | |||
6r1 analog display schem.png | |||
</gallery> | </gallery> | ||
The ANALOG DISPLAY board is responsible for intensifying the trace during the 0% zone, | The ANALOG DISPLAY board is responsible for intensifying the trace during the 0% zone, | ||
Line 259: | Line 260: | ||
==Pictures== | ==Pictures== | ||
<gallery> | <gallery> | ||
6r1_front.jpg|Front view | |||
6r1_right2.jpg|Right view | |||
6r1_j33.jpg|Connector J33 | |||
6r1 j33 schem.png|Connector J33 pinout | |||
6r1_j34.jpg|Connector J34 | |||
6r1 j34 schem.png|Connector J34 pinout | |||
6r1 timing stop switch schem.png|Timing stop switch | |||
6r1 timing start switch schem.png|Timing start switch | |||
6r1 resolution switch schem.png|Resolution switch | |||
6r1 readout tubes schem.png|Readout tubes | |||
6r1 plug-in circuit board connectors schem.png|Backplane wiring | |||
6r1 mode switch schem.png|Mode switch | |||
6r1 upper limit switches schem.png|Upper limit switches | |||
6r1 lower limit switches schem.png|Lower limit switches | |||
6r1 connectors to indicators unit schem.png|Connections to 567 | |||
Tek 012-067 012-068 1964 cat.jpg|012-067 and 012-068 | |||
</gallery> | </gallery> | ||
[[Category:560 series plugins]] | [[Category:560 series plugins]] |