33,090
edits
H: Difference between revisions
Jump to navigation
Jump to search
no edit summary
David Wise (talk | contribs) mNo edit summary |
No edit summary |
||
| Line 12: | Line 12: | ||
* [http://w140.com/tek_fcp/tek_type_h_factory_cal_proc.pdf Tektronix Type H Factory Calibration Procedure (PDF)] | * [http://w140.com/tek_fcp/tek_type_h_factory_cal_proc.pdf Tektronix Type H Factory Calibration Procedure (PDF)] | ||
}} | }} | ||
The '''Tektronix Type H''' is a single-channel plug-in for [[500-series scopes]]. | The '''Tektronix Type H''' is a single-channel plug-in for [[500-series scopes]]. | ||
inputs and has a switch to select between them. | It provides two inputs and has a switch to select between them. | ||
The sensitivity ranges from 5 mV/cm to 20 V/cm. | The rise time of the plug-in is 20 ns, bandwidth is 15 MHz. | ||
fast as [[B|Type B]], but it is DC-coupled on all ranges. | The sensitivity ranges from 5 mV/cm to 20 V/cm. | ||
A design compromise, Type H is not as fast as [[B|Type B]], | |||
but it is DC-coupled on all ranges. | |||
Later Type H models use a [[Turret attenuators|turret attenuator]]. | Later Type H models use a [[Turret attenuators|turret attenuator]]. | ||