42
edits
2465: Difference between revisions
Jump to navigation
Jump to search
m
Tidied options and years of introduction (deduced from the catalogues).
No edit summary |
m (Tidied options and years of introduction (deduced from the catalogues).) |
||
| Line 20: | Line 20: | ||
}} | }} | ||
The '''Tektronix 2465''' is a four-channel 300 MHz portable oscilloscope. | The '''Tektronix 2465''' is a four-channel 300 MHz portable oscilloscope. | ||
The 2465A is a 350 MHz scope and the 2465B is the 400 MHz version. | The 2465A is a 350 MHz scope (1987) and the 2465B (1989) is the 400 MHz version. | ||
It is the same as the [[2467]], except that the 2465 uses a conventional CRT | It is the same as the [[2467]], except that the 2465 uses a conventional CRT | ||
| Line 30: | Line 30: | ||
* Option 01 (DMM) added a 4 ½digit, fully autoranging digital multimeter which measures DC and AC voltage and current, resistance, dBV, dBm, continuity, and temperature. | * Option 01 (DMM) added a 4 ½digit, fully autoranging digital multimeter which measures DC and AC voltage and current, resistance, dBV, dBm, continuity, and temperature. | ||
* Option 05 (TV) added TV (back-porch) clamp circuitry to the Channel 2 input and TV trigger coupling modes, allowing selection of either horizontal or vertical sync pulses to obtain horizontal-line-sync or field-sync pulse triggering. | * Option 05 (TV) added TV (back-porch) clamp circuitry to the Channel 2 input and TV trigger coupling modes, allowing selection of either horizontal or vertical sync pulses to obtain horizontal-line-sync or field-sync pulse triggering. | ||
* Option 06 (Counter/Timer/Trigger) allows precision time-interval measurement, event and frequency counting, delay-by-events triggering, and logic triggering. | * Option 06 (Counter/Timer/Trigger) allows precision time-interval measurement, event and frequency counting, delay-by-events triggering, and logic triggering. | ||
* Option 09 added option 06 plus a 17-bit | * Option 09 added option 06, the CTT, plus a 17-bit word recognizer probe ([[P6407|P6407 Word Recognizer Probe]]). | ||
* Option 10 added a [[GPIB interface]] for remote control. | * Option 10 added a [[GPIB interface]] for remote control. | ||
* Option 11 added two [[LEMO S-series connector|probe-power connectors]] on the rear panel of the instrument. | * Option 11 added two [[LEMO S-series connector|probe-power connectors]] on the rear panel of the instrument. Only shown in the Tektronix catalogues for the 2465A (1987) and 2465B (1989) | ||
{{MissingSpecs}} | {{MissingSpecs}} | ||