33,018
edits
M377: Difference between revisions
Jump to navigation
Jump to search
no edit summary
No edit summary |
|||
| Line 29: | Line 29: | ||
* High-frequency adjustment. The HF ADJ pins have 2k ohms input resistance to ground. The nominally acceptable inputs are ±1V to ground. Because the input resistance tracks the nichrome standard resistors inside the chip, the input is actually current sensitive, not that it makes much difference. This current affects the standing current in a feedback amplifier and hence its open loop gain. At low frequencies, the gain of the M377 is determined entirely by resistor values. At high frequencies, there is phase shift and changing the open loop gain will also change the closed loop gain, hence the transient response. | * High-frequency adjustment. The HF ADJ pins have 2k ohms input resistance to ground. The nominally acceptable inputs are ±1V to ground. Because the input resistance tracks the nichrome standard resistors inside the chip, the input is actually current sensitive, not that it makes much difference. This current affects the standing current in a feedback amplifier and hence its open loop gain. At low frequencies, the gain of the M377 is determined entirely by resistor values. At high frequencies, there is phase shift and changing the open loop gain will also change the closed loop gain, hence the transient response. | ||
The M377 has a single VAR GAIN control input. | |||
This control signal has a range of -1 V to +1 V. | |||
-1 V results in 0 gain. | |||
+1 V results in full gain. | |||
{| class="wikitable" | {| class="wikitable" | ||
|- | |- | ||