160: Difference between revisions

Jump to navigation Jump to search
38 bytes removed ,  13 July 2011
no edit summary
No edit summary
No edit summary
Line 8: Line 8:
Signal connections are made on the front, typically with banana plugs.   
Signal connections are made on the front, typically with banana plugs.   
The 160, 161, 162, and 163 use the ceramic strip and silver solder construction style  
The 160, 161, 162, and 163 use the ceramic strip and silver solder construction style  
that is prevalent in other Tektronix equipment of the era, such as the 500-series scopes.
that is prevalent in other Tektronix equipment of the era, such as the 500-series scopes like the [[545]].
The Type 360 indicator unit contains the CRT HV power supply and the vertical amplifier  
The Type 360 indicator unit contains the CRT HV power supply and the vertical amplifier  
and is constructed using a single-sided printed circuit board.
and is constructed using a single-sided printed circuit board.
Line 19: Line 19:
The signals on the front panel of the 160-series modules are all single-ended.   
The signals on the front panel of the 160-series modules are all single-ended.   
The 360 has a phase splitter to generate the differential drive for the horizontal deflection plates.
The 360 has a phase splitter to generate the differential drive for the horizontal deflection plates.
The 360 uses as standard 3WP 3-inch (7.5cm) round CRT.   
The 360 uses a standard [[3WP|3WP series 3-inch CRT]].   
The cathode voltage is -1850 volts.  No post-deflection acceleration is used.
The cathode voltage is -1850 volts.  No post-deflection acceleration is used.


Line 34: Line 34:


* [http://bama.edebris.com/download/tek/160/tek%20160.pdf Tektronix 160-series Manual (PDF)]
* [http://bama.edebris.com/download/tek/160/tek%20160.pdf Tektronix 160-series Manual (PDF)]
* [http://w140.com/3WP1.pdf 3WP1 CRT Datasheet (PDF)]
 


<gallery>
<gallery>

Navigation menu