Pacific Measurements 1038: Difference between revisions

Jump to navigation Jump to search

Pacific Measurements 1038 (view source)

Revision as of 08:55, 22 April 2019

50 bytes removed ,  22 April 2019
no edit summary
No edit summary
No edit summary
Line 17: Line 17:
<!-- [[File:Pacific Measurements 1038.jpg | thumb | 300px | right | Pacific Measurements 1038 with Tek D11 display]] -->
<!-- [[File:Pacific Measurements 1038.jpg | thumb | 300px | right | Pacific Measurements 1038 with Tek D11 display]] -->


The '''Pacific Measurements 1038''' is a 1 or 2 channel scalar network analyzer incorporating a Tektronix [[5110 | D10]] (P-7 long persistance phosphor), [[5111 | D11 storage]] (Split Screen Storage) or [[http://w140.com/tekwiki/wiki/Introduction_to_the_5000-Series_Oscilloscopes D14]] [[5000-series scopes]] display unit mainframe with optional rack mount and IEEE bus. <br>
The '''Pacific Measurements 1038''' is a 1 or 2 channel scalar network analyzer
incorporating a Tektronix [[5110 | D10]] (P-7 long persistance phosphor),  
[[5111 | D11 storage]] (Split Screen Storage) or  
[[http://w140.com/tekwiki/wiki/Introduction_to_the_5000-Series_Oscilloscopes D14]]
[[5000-series scopes]] display unit mainframe with optional rack mount and IEEE bus.


Options were available for:<br>
Options were available for:
• Horizontal Plug-Ins H10 (Sweep drive), H11 (Sweep Drive and memory address circuits), H12 (Sweep drive and ratio channel), H13 (Sweep drive, memory address circuits and ratio channel) and K11 (Replaces H11 and provides amplitude sweep). <br>
* Horizontal Plug-Ins H10 (Sweep drive), H11 (Sweep Drive and memory address circuits), H12 (Sweep drive and ratio channel), H13 (Sweep drive, memory address circuits and ratio channel) and K11 (Replaces H11 and provides amplitude sweep).
• Vertical Plug-Ins V10 (Log amp and signal conditioning), V11 (Log amp, signal conditioning and 256 point memory), V12 (Log amp, signal conditioning and 1024 point memory) and V20 (Linear amp, 1024 point memory and for use in conjunction with Model 1018B power meter). <br>
* Vertical Plug-Ins V10 (Log amp and signal conditioning), V11 (Log amp, signal conditioning and 256 point memory), V12 (Log amp, signal conditioning and 1024 point memory) and V20 (Linear amp, 1024 point memory and for use in conjunction with Model 1018B power meter).
• N10 Plug-In (2 Channel Network Analyzer). <br>
* N10 Plug-In (2 Channel Network Analyzer).
• NS20 Plug-In (2 Channel Network Analyzer) with optional NS201 (2 to 18.5 GHz RF Source Module). <br>
* NS20 Plug-In (2 Channel Network Analyzer) with optional NS201 (2 to 18.5 GHz RF Source Module).
• C10 Plug-In Calibration Fixture and Extender Kit for direct calibration and check out of the D14/D14A Mainframe. It has extension cables to permit calibration and maintenance of the H/V system plug-ins. <br>
* C10 Plug-In Calibration Fixture and Extender Kit for direct calibration and check out of the D14/D14A Mainframe. It has extension cables to permit calibration and maintenance of the H/V system plug-ins.
• Power Input Calibrator Unit (Detector Simulator - P/N 15484) will act as a "Standard" detector to furnish accurate voltages to the H/V system when it is desired to calibrate the amplitde correction circuitry. <br>
* Power Input Calibrator Unit (Detector Simulator - P/N 15484) will act as a "Standard" detector to furnish accurate voltages to the H/V system when it is desired to calibrate the amplitde correction circuitry.


Pacific Measurements later became part of [[Wavetek]].  
Pacific Measurements later became part of [[Wavetek]].  
Retrieved from "https://w140.com/tekwiki/wiki/Special:MobileDiff/44616"

Navigation menu