TDS1012: Difference between revisions

Jump to navigation Jump to search

TDS1012 (view source)

Revision as of 09:23, 25 May 2019

1 byte added ,  25 May 2019
no edit summary
No edit summary
No edit summary
Line 1: Line 1:
The '''Tektronix TDS1012''' is a dual-channel, 100 MHz, 1 GS/s digital scope with a monochrome LCD screen.  An External trigger input, along with a CompactFlash card slot on front, and the rear mounted optional TDS2CMA Communication Module provides Centronics printer port, RS-232, and GPIB rear ports for convenient interconnectivity.
Easy access to the MATH MENU button provides waveform adjustments (CH1-CH2, CH2-CH1, CH1+CH2) along with FFT (spectrum, harmonics, distortion, noise, impulse, vibration) measurements.  Measurements can also be performed for time (frequency) and voltage (amplitude).  Repetitive signals can be captured and averaged to remove noise, or captured as a single-shot signal.
Triggering of signal capturing is available through a comprehensive TRIG MENU providing Edge (rising or falling), Video (NTSC, PAL, SECAM), and Pulse Width (or Glitch) triggering on CH1, CH2, Ext and AC Line sources.
{{Oscilloscope Sidebar |
{{Oscilloscope Sidebar |
title=Tektronix TDS1012 |
title=Tektronix TDS1012 |
Line 20: Line 14:
* [[Media:TDS1000 AND TDS2000 SERIES FIRMWARE UPDATE.txt| TDS1000 AND TDS2000 Series Firmware Update Notice]] (786 B TXT)
* [[Media:TDS1000 AND TDS2000 SERIES FIRMWARE UPDATE.txt| TDS1000 AND TDS2000 Series Firmware Update Notice]] (786 B TXT)
}}
}}
The '''Tektronix TDS1012''' is a dual-channel, 100 MHz, 1 GS/s digital scope with a monochrome LCD screen.  An External trigger input, along with a CompactFlash card slot on front, and the rear mounted optional TDS2CMA Communication Module provides Centronics printer port, RS-232, and GPIB rear ports for convenient interconnectivity.
Easy access to the MATH MENU button provides waveform adjustments (CH1-CH2, CH2-CH1, CH1+CH2) along with FFT (spectrum, harmonics, distortion, noise, impulse, vibration) measurements.  Measurements can also be performed for time (frequency) and voltage (amplitude).  Repetitive signals can be captured and averaged to remove noise, or captured as a single-shot signal.
Triggering of signal capturing is available through a comprehensive TRIG MENU providing Edge (rising or falling), Video (NTSC, PAL, SECAM), and Pulse Width (or Glitch) triggering on CH1, CH2, Ext and AC Line sources.


{{BeginSpecs}}
{{BeginSpecs}}
Floopy
1,332

edits

Retrieved from "https://w140.com/tekwiki/wiki/Special:MobileDiff/46482"

Navigation menu