1,192
edits
No edit summary |
No edit summary |
||
Line 4: | Line 4: | ||
image= 2784_Waveform_image.jpg | | image= 2784_Waveform_image.jpg | | ||
caption=Tektronix 2784 | | caption=Tektronix 2784 | | ||
introduced= | introduced=1993 | | ||
discontinued= | discontinued=1997 | | ||
manuals= | manuals= | ||
* [[Media:070-8244-02.pdf|Tektronix 2780 Series Service Manual (PDF, needs OCR)]] | * [[Media:070-8244-02.pdf|Tektronix 2780 Series Service Manual (PDF, needs OCR)]] | ||
Line 24: | Line 24: | ||
Front panel inputs/outputs are: RF INPUT 50Ω [[Planar Crown interface]] (Compatible with K or type N connectors); EXTERNAL MIXER [[SMA connector]] (50Ω) , LO OUTPUT [[SMA connector]] (Provides access to the output of the 1st local oscillator at >+4 dBm. Must be terminated in 50Ω at all times); REF SIGNAL OUT [[SMA connector]] (100 MHz -20dBm phase locked to reference oscillator); and ACCESSORY IN (general purpose serial data port); PROBE POWER (Provides operating voltages for active probes). | Front panel inputs/outputs are: RF INPUT 50Ω [[Planar Crown interface]] (Compatible with K or type N connectors); EXTERNAL MIXER [[SMA connector]] (50Ω) , LO OUTPUT [[SMA connector]] (Provides access to the output of the 1st local oscillator at >+4 dBm. Must be terminated in 50Ω at all times); REF SIGNAL OUT [[SMA connector]] (100 MHz -20dBm phase locked to reference oscillator); and ACCESSORY IN (general purpose serial data port); PROBE POWER (Provides operating voltages for active probes). | ||
Rear panel inputs are: FREQ REF (IN/OUT) [[BNC connector]] (50Ω; Input signal freq. allowed: 10 MHz ±5 Hz, Input signal amplitude range: 0 dBm to +15 dBm max; Output signal: Nominally 0 dBm at 10 MHz (TTL-compatible), Phase noise allowed: ≤-100 dBc/Hz at 1 Hz offset); TRIG/HORIZ IN [[BNC connector]] (Nom 1 kΩ, or 8.25 kΩ (sweep mode), Input voltage change for triggering: 0.5V P-P, Input voltage for sweep: selectable between 0 V left side to +10 V right side of screen, between -5 V left side to +5 V right side of screen)); ACCESSORY female [[DB15 connector]] (External inputs and outputs); and INSTRUMENT BUS female [[DB9 connector]] (Serial communications | Rear panel inputs are: FREQ REF (IN/OUT) [[BNC connector]] (50Ω; Input signal freq. allowed: 10 MHz ±5 Hz, Input signal amplitude range: 0 dBm to +15 dBm max; Output signal: Nominally 0 dBm at 10 MHz (TTL-compatible), Phase noise allowed: ≤-100 dBc/Hz at 1 Hz offset); TRIG/HORIZ IN [[BNC connector]] (Nom 1 kΩ, or 8.25 kΩ (sweep mode), Input voltage change for triggering: 0.5V P-P, Input voltage for sweep: selectable between 0 V left side to +10 V right side of screen, between -5 V left side to +5 V right side of screen)); ACCESSORY female [[DB15 connector]] (External inputs and outputs); and INSTRUMENT BUS female [[DB9 connector]] (Serial communications bus that processors use to communicate with each other and rest of instrument modules). | ||
Rear panel outputs are: V OUT [[BNC connector]] (50Ω; External display vertical signal output); H OUT [[BNC connector]] (50Ω; External display horizontal signal output); Z OUT [[BNC connector]] (50Ω; External display blanking signal output); IF OUT [[BNC connector]] (50Ω; Amplitude); and PORT 1 [[GPIB interface]] and PORT 2 [[GPIB interface]]. | Rear panel outputs are: V OUT [[BNC connector]] (50Ω; External display vertical signal output); H OUT [[BNC connector]] (50Ω; External display horizontal signal output); Z OUT [[BNC connector]] (50Ω; External display blanking signal output); IF OUT [[BNC connector]] (50Ω; Amplitude); and PORT 1 [[GPIB interface]] and PORT 2 [[GPIB interface]]. |
edits