32,959
edits
Tek Engineering Circa 1962-1964: Difference between revisions
Jump to navigation
Jump to search
no edit summary
No edit summary |
No edit summary |
||
| Line 41: | Line 41: | ||
Possibly [[Dave Barton]], a very good engineer who left in about 1964 | Possibly [[Dave Barton]], a very good engineer who left in about 1964 | ||
[[Oz Svehaug]] West of Rullman’s group was the [[647]] group | =[[Oz Svehaug]] West of Rullman’s group was the [[647]] group= | ||
After September 1963, Oz left Tek for health reasons | After September 1963, Oz left Tek for health reasons | ||
and the group was run by [[Oliver Dalton]]: | and the group was run by [[Oliver Dalton]]: | ||
| Line 62: | Line 62: | ||
[[Jim Knapton]] - horizontal amplifier-also manager of Digital Systems Group | [[Jim Knapton]] - horizontal amplifier-also manager of Digital Systems Group | ||
[[Russ Fillinger]] next bay west of the 647 group was Low Frequency & Bio-medical Systems | =[[Russ Fillinger]] next bay west of the 647 group was Low Frequency & Bio-medical Systems= | ||
* [[Mel Holtznagel]] - not sure of project, may have left this group in mid 1963 | * [[Mel Holtznagel]] - not sure of project, may have left this group in mid 1963 | ||
* [[John Addis]]- [[1A7]] | * [[John Addis]]- [[1A7]] | ||
| Line 82: | Line 82: | ||
[[Gary Vance]] (joined about 1966)- [[502A]] | [[Gary Vance]] (joined about 1966)- [[502A]] | ||
Unknown manager West of LF and Biomedical and possibly on both sides of the hallway was Marketing | =Unknown manager West of LF and Biomedical and possibly on both sides of the hallway was Marketing= | ||
* [[Geoff Gass]] | |||
[[Geoff Gass]] | * [[Stan Foss]] | ||
* [[Sandy Sanford]] | |||
[[Stan Foss]] | |||
[[Sandy Sanford]] | |||
The west end of the building extending to the south hallway was the model shop. | The west end of the building extending to the south hallway was the model shop. | ||
Unknown manager Model Shop (took up width of the building from North Wall to the South Hall) | =Unknown manager Model Shop (took up width of the building from North Wall to the South Hall)= | ||
* [[Les Wold]] | |||
[[Les Wold]] | * About 20 machinists, metal working equipment. | ||
About 20 machinists, metal working equipment. | |||
Going east from the west wall was the south hallway parallel to the south wall. Engineering bays were between the hallway and the south wall. | Going east from the west wall was the south hallway parallel to the south wall. Engineering bays were between the hallway and the south wall. | ||
=From the west wall going east was TV-Scan Conversion headed by Charlie Rhodes= | |||
* [[Larry Biggs]] - [[1A2]] for the 547 group | |||
From the west wall going east was TV-Scan Conversion headed by Charlie Rhodes | ** [[John Horn]] - [[W]] for the 540 series | ||
** [[Ron Olson]] - [[1A1]] for the [[547]] group | |||
Larry Biggs-1A2 for the 547 group | |||
* [[Doug Dickie]] | |||
** [[Stan Baker]] (technician?) | |||
** [[Phil Crosby]] | |||
** [[Stan Tate]] (technician?) | |||
Doug Dickie | ** [[Victor Kong]] (later) | ||
** [[Steve Roth]] (later) | |||
Stan Baker (technician?) | ** [[Walt Lowy]] (technician, later) | ||
Phil Crosby | |||
Stan Tate (technician | |||
Victor Kong (later) | |||
Steve Roth (later) | |||
Walt Lowy (technician, later) | |||
Al Zimmerman The next bay east was probably the Sampling group | =Al Zimmerman The next bay east was probably the Sampling group= | ||
Norm Winningstad-may have had an office in this area | Norm Winningstad-may have had an office in this area | ||
* [[Gordon Long]] - stand alone pulsers | |||
* [[George Fry]]-sampling heads | |||
* [[Andy Cheers]] | |||
* [[Jim Geddes]] | |||
* [[Leo Heineck]] | |||
* [[Fred Kawabata]] | |||
* [[Ray Underwood]] | |||
** [[Gene Cowan]] - pulser heads | |||
** [[Chuck Donaldson]] | |||
** [[Chuck Edgar]] | |||
** [[Stu MacNaughton]] | |||
= [[Cal Hongel]] Next bay east was Accessories Design until mid 1963. Then [[Wim Velsink]], then [[Ken Holland]] for years.= | |||
Cal Hongel Next bay east was Accessories Design until mid 1963. Then Wim Velsink, then Ken Holland for years. | |||
R. Michael Johnson | * [[R. Michael Johnson]] | ||
** Marv DeSautel (technician) | |||
Marv DeSautel (technician) | * Bill Lukens | ||
* Bill Peek | |||
Bill Lukens | ** Bob Beck | ||
** John Roberts (known later as Jack Roberts) | |||
Bill Peek | ** [[Hans Springer]] | ||
* Bert ten Kate | |||
Bob Beck | ** Bud Bender | ||
** Will Coffin | |||
John Roberts (known later as Jack Roberts) | ** Tommy Thompson | ||
** Ron Peltola (later) | |||
Hans Springer | |||
Bert ten Kate | |||
Bud Bender | |||
Will Coffin | |||
Tommy Thompson | |||
Ron Peltola (later) | |||
Jim Knapton Next bay east was Digital Systems | Jim Knapton Next bay east was Digital Systems | ||