188
edits
(→Links) |
No edit summary |
||
Line 4: | Line 4: | ||
Standard built-in components included a 20-character alphanumeric (14-segment) LED display, numeric keypad, a 20 character-per-row, 60 mm-wide thermal printer, a DC-100 cartridge tape drive, and a real-time clock. | Standard built-in components included a 20-character alphanumeric (14-segment) LED display, numeric keypad, a 20 character-per-row, 60 mm-wide thermal printer, a DC-100 cartridge tape drive, and a real-time clock. | ||
Interfaces included one or two [[GPIB]] and RS-232 interfaces, and an optional SCSI bus to connect diskette and hard drives. | Interfaces included one or two [[GPIB]] and RS-232 interfaces, and an optional SCSI bus to connect diskette and hard drives. | ||
RAM could be | RAM could be ordered between 64k and 512k Bytes. The CPU in the 4041 is a [[Motorola 68000]]. | ||
The base model was equipped only to execute pre-tokenized BASIC programs stored on cassette or in ROM. To develop programs, a 4041 with option 30 was needed. Option 31 added a full alphanumeric keyboard although the catalog recommended a CRT terminal for editing programs. | The base model was equipped only to execute pre-tokenized BASIC programs stored on cassette or in ROM. To develop programs, a 4041 with option 30 was needed. Option 31 added a full alphanumeric keyboard although the catalog recommended a CRT terminal for editing programs. | ||
Line 10: | Line 10: | ||
Option 01 added second GPIB and RS-232 ports, while option 03 added the SCSI interface and an RS-232 port. | Option 01 added second GPIB and RS-232 ports, while option 03 added the SCSI interface and an RS-232 port. | ||
The 4041 has a stand-alone enclosure but matches the height of [[TM5000 system|TM5000 enclosures]]. Mounting kits allowed installation of a 4041 plus a [[TM5003]] or a 4041 plus a [[4041DDU]] disk unit side-by-side in a 19"rack. | The 4041 has a stand-alone enclosure but matches the height of [[TM5000 system|TM5000 enclosures]]. Mounting kits allowed installation of a 4041 plus a [[TM5003]] or a 4041 plus a [[4041DDU]] disk unit side-by-side in a 19" rack. | ||
The front panel contains a socket to connect the keyboard. It uses the same 4-pin S-series Lemo connector as used for the power supply connections of many Tek probes. | |||
==See Also== | ==See Also== |
edits