TDS754: Difference between revisions

Jump to navigation Jump to search
1,785 bytes added ,  30 April 2022
Added specs firmware and links
(Added PCMCIA HD option photo)
(Added specs firmware and links)
Line 58: Line 58:
}}
}}


The '''Tektronix TDS754''' is a 500 MHz, 2 GS/s quad-channel digital storage scope.
The '''Tektronix TDS754''' is a 500 MHz, 2 GS/s four-channel digital storage scope with a color screen.


{{BeginSpecs}}
{{BeginSpecs}}
{{Spec | Bandwidth and Channels| 500 MHz; 2 Channels }}
 
{{Spec | Bandwidth   | 500 MHz at 10 mv/div and above; 750 MHz @ 5 mV/div; 600 MHz @ 2 mV/div; 500 MHz @ 1 mV/div }}
{{Spec | Sample rate | 1 or 2 channels @ 2 GS/s, 3 or 4 channels @ 1 GS/s }}
{{Spec | Number of Channels | 4 }}
{{Spec | Vertical Sensitivity| 1 mV to 10 V/div with calibrated fine adjustment }}
{{Spec | Vertical Sensitivity| 1 mV to 10 V/div with calibrated fine adjustment }}
{{Spec | Resolution  | 8 bit }}
{{Spec | Time Base Range| 500 ps to 10 s/div }}
{{Spec | Time Base Range| 500 ps to 10 s/div }}
{{Spec | Sample Rate| 2.0 GS/s on 1 channel ; 2.0 GS/s on  2 channels ; 1 GS/s on 3 or 4 channels }}
{{Spec | Record length | 50k samples per channel }}
{{Spec | Record Length| 50 K points each channel }}
{{Spec | Record Length (1M Option)| 500 K points on 1 channel;  250 k points on 2 channels ; 130 k points on 3 or 4 channels }}
{{Spec | Record Length (1M Option)| 500 K points on 1 channel;  250 k points on 2 channels ; 130 k points on 3 or 4 channels }}
{{Spec | Record Length (2M Option)| 8 M points on 1 channel;  4 M points on 2 channels ; 2 M points on 3 or 4 channels }}
{{Spec | Record Length (2M Option)| 8 M points on 1 channel;  4 M points on 2 channels ; 2 M points on 3 or 4 channels }}
{{Spec | Interface        | [[GPIB]] standard ; [[RS-232 interface]] ; [[Centronics interface]]         }}
{{Spec | Acquisition modes | sample, envelope, average, high-resolution, peak-detect }}
{{Spec | Options |
{{Spec | Display  | Color; Zoom }}
* 1F − Floppy disk drive
{{Spec | Trigger modes | Edge, logic, pulse; Video trigger with option 05 ([[NTSC]], [[SECAM]], [[PAL]], HDTV, and FlexFormat) }}
* 2F − Advanced DSP math
{{Spec | Storage | 1.44 Mbyte, 3.5 inch, DOS 3.3-or-later floppy disk. NVRAM storage for saving waveforms, hardcopies, and setups. Units with option HD present (requires additional hardware) have a hard disk drive }}
* 1M − Record length 500k (1 ch)
{{Spec | I/O | Full GPIB programmability }}
* 2M − Record length 8M (1 ch)
{{Spec | Hardcopy | Using [[GPIB]], [[RS-232]], or Centronics ports }}
* 13 − [[RS-232 interface]] and [[Parallel printer interface]]
}}
{{EndSpecs}}
{{EndSpecs}}


Line 98: Line 99:
* [[Media:TDS754D_v6.3e_Firmware.zip|TDS754D v6.3e Firmware]] (ZIP)
* [[Media:TDS754D_v6.3e_Firmware.zip|TDS754D v6.3e Firmware]] (ZIP)
* [[Media:TDS754D_v6.4e_Firmware.zip|TDS754D v6.4e Firmware]] (ZIP)
* [[Media:TDS754D_v6.4e_Firmware.zip|TDS754D v6.4e Firmware]] (ZIP)
* [[Media:TDS754D_v6.6e_Firmware.zip|TDS754D v6.6e Firmware]] (ZIP)


* [[Media:TDS754D_v7.1.1e_Firmware.zip|TDS754D v7.1.1e Firmware]] (ZIP)
* [[Media:TDS754D_v7.1.1e_Firmware.zip|TDS754D v7.1.1e Firmware]] (ZIP)
Line 104: Line 106:


==Links==
==Links==
* [http://www.eevblog.com/forum/testgear/conversion-of-500mhz-tds744a-to-1ghz-tds784a/ Conversion of 500 MHz TDS744A to 1 GHz TDS784A]
See the [[TDS794D/Repairs|Repairs page]] regarding HDD/FDD replacements.
* [http://www.simmconnlabs.com/1401/2606.html/ Simmconn Labs LCD replacement kits for CRT-based TDS O-scopes]
 
* [http://www.eevblog.com/forum/testgear/hackingupgrading-old-scope-(tds754d)/ EEVBlog Forum thread on TDS options and how to enable them]
* Tek Forum threads:
** [http://forum.tek.com/viewtopic.php?f=568&t=140017/  Recovering the unit from a bricked state]
** [http://forum.tek.com/viewtopic.php?f=568&t=139999&hilit=TDS784/ Firmware updating]
** [http://forum.tek.com/viewtopic.php?f=568&t=138168&hilit=TDS784/ Backing up and restoring calibration data]
* EEVBlog Forum Threads:
** [http://www.eevblog.com/forum/testgear/conversion-of-500mhz-tds744a-to-1ghz-tds784a/ Conversion of 500 MHz TDS744A to 1 GHz TDS784A]
** [http://www.eevblog.com/forum/testgear/hackingupgrading-old-scope-(tds754d)/ EEVBlog Forum thread on TDS options and how to enable them]
** [https://www.eevblog.com/forum/repair/unified-tektool-released-!-(firmware-flash-tools-for-old-tds-series)/ Firmware update via GPIB]
** [https://www.eevblog.com/forum/repair/tektronix-tds500-700-debug-konscole-interface/ Serial debug and console interface card for TDS500-700 series]
** [https://www.eevblog.com/forum/testgear/console-port-debug-adapter-for-tek-tds500-tds600-and-tds700-series-scopes/ Console port debug adapter for TDS500-700 series]
* Youtube
** [https://www.youtube.com/watch?v=ve-MnHakY6Y NVRAM module replacement - Near Far Media]
** [https://www.youtube.com/watch?v=b0P1sJBomDQ Input hybrid repair - Near Far Media]
** [https://www.youtube.com/watch?v=ZsxKTOmeZ2k Power supply repair - Near Far Media]
 
* [https://simmconnlabscom.ipage.com/store/page5.html Simmconn Labs LCD replacement kits for CRT-based TDS O-scopes]
* [https://www.tek.com/support/faqs/i-lost-my-wavestar-keycode-how-can-i-get-it-back Wavestar Product Key]
* [https://www.hakanh.com/dl/TDSErrLog.htm TDS error log viewer]
* [http://www.ko4bb.com/getsimple/index.php?id=enable-tds754d-options Enabling options via GPIB interface - ko4bb.com]
* [http://www.ko4bb.com/getsimple/index.php?id=enable-tds754d-options Enabling options via GPIB interface - ko4bb.com]


1,330

edits

Navigation menu