1,341
edits
067-0500-00/Repairs: Difference between revisions
Jump to navigation
Jump to search
Created page with "In order to allow my 3M1 to work with 40 V pulses, I added a second resistor in parallel to R104, increasing the quiescent bias point of the 6DJ8. The resistor I added was a 620 kΩ, and the resulting parallel combination measures ~185 kΩ. This now works perfectly in my 564B. It should work equally well in any 560 series scope. You can see the extra resistor piggy-backed on R104 in the last two photos of the 3M1. It's worth noting that the input circuit in the 3M1 a..."
(Created page with "In order to allow my 3M1 to work with 40 V pulses, I added a second resistor in parallel to R104, increasing the quiescent bias point of the 6DJ8. The resistor I added was a 620 kΩ, and the resulting parallel combination measures ~185 kΩ. This now works perfectly in my 564B. It should work equally well in any 560 series scope. You can see the extra resistor piggy-backed on R104 in the last two photos of the 3M1. It's worth noting that the input circuit in the 3M1 a...") |
(No difference)
|