WP1000AF: Difference between revisions

* [[Media:Tek 7b71 mod 515c.pdf | Tektronix Mod 515C supplement]]

* [[Media:061-1742-00.pdf|Tektronix 7A16A Mod 515D Manual]]

The '''Tektronix WP1000AF''' [[DPO|Digial Processing Oscilloscope System]] is a bundle of a DPO, two [[7A16A]] and two [[7B71]] plugins. All components have additional modifications, which allows an external computer to control some of the settings. The National Stock Number ([[NSN]]) for this bundle was 6625-01-034-4833.  

Tek_wp1000af_front_01.jpg|Front view of the system. The Mainframe and the plugins have remote/local switches

Tek_wp1000af_mod515c_label.jpeg|Tag indicating the modification

Tek_wp1000af_remote_local.jpeg|remote/local switch

Tek_wp1000af_honeywell_tag.jpeg|Tag added by Honeywell - indicates the later usage of this mainframe

Tek_wp1000af_rear_connectors.jpeg|The additional connectors for remote control  

Tek_wp1000af_remote_rear.jpg|The additional connectors for remote control (rear view)

Tek_wp1000af_replacement_connectors.jpg|Replacements for the remote control connectors are still available in 2024

Tek_wp1000af_powersuppply.jpeg|The MOD515C needs a permanent 5V. The switch for turning off the lights was removed

Tek_wp1000af_brd_pwrsupply.jpg|Additional connector board on the power supply

Tek_wp1000af_allboards_mainframe.jpg|Most boards of the MOD515C modification

Tek_wp1000af_boards.jpeg|Overview on the additional boards in the lower section of the mainframe

Tek_wp1000af_mode_switches.jpg|The replaced mode switches.  

Tek_wp1000af_horzmode_top.jpg|Horizontal mode switch assembly. The lights work independently from the switches.

Tek_wp1000af_horzmode_bottom.jpg|Horizontal mode switch assembly. The lights work independently from the switches.

Tek_wp1000af_vertmode_top.jpg|Horizontal mode switch assembly. The lights work independently from the switches.

Tek_wp1000af_vertmode_bottom.jpg|Horizontal mode switch assembly. The lights work independently from the switches.

Tek_wp1000af_switch_logic.jpeg|The main logic board of the MOD515C

Tek_wp1000af_mainlogic_top.jpeg|The main logic board of the MOD515C

Tek_wp1000af_mainlogic_bottom.jpeg|The main logic board of the MOD515C

Tek_wp1000af_serial_board.jpeg|The serial receiver board

Tek_wp1000af_serial_top.jpg|The serial receiver board

Tek_wp1000af_serial_bottom.jpg|The serial receiver board

Tek_wp1000af_calibrator.jpg|The modified calibrator board

Tek_wp1000af_maininterface_01.jpg|Additional coax connectors of the plugin interfaces

Tek_wp1000af_maininterface_02.jpg|Additional coax connectors of the plugin interfaces

The only modification the P7001 was on the z-axis/front panel pcb. The switch allowed a longer timeout for the external computer.

Tek_wp1000af_p7001_frontpanel01.jpg|Z-Axis/Frontpanel pcb with additional switch and timing resistors

Tek_wp1000af_p7001_frontpanel02.jpg|Z-Axis/Frontpanel pcb with additional switch and timing resistors

Tek_7a16a_mod515d_front.jpg|Front view of a 7A16A plugin with MOD515D

Tek_7a16a_mod515d_left.jpg|Left side

Tek_7a16a_mod515d_right.jpg|Right side

Tek_7a16a_mod515d_top.jpg|Top side

Tek_7a16a_mod515d_serial.jpg|Closeup of serial number and MOD515D sticker

The 7B71 timebase with MOD515C can be configured as a delaying or as a delayed timebase

Tek_7B71_mod515c_front.jpg|Front view of a 7B71 plugin with MOD515C

Tek_7B71_mod515c_left.jpg|Left side

Tek_7B71_mod515c_right.jpg|Right side

Tek_7B71_mod515c_top.jpg|Top side

Tek_7B71_mod515c_serial.jpg|Closeup of serial number and MOD515C sticker

Honeywell replaced the feet of the unit. They also added a cable tie holder and a tag to the back of the unit. The result got the Honeywell part-number 10066273-101 and the NSN number 6625-01-060-4390

-Tek_wp1000af_feet_honeywell_01jpg.jpeg|Replaced foot

Tek_wp1000af_feet_honeywell_03.jpg|Replaced foot

Tek_wp1000af_feet_honeywell_02jpg.jpeg|Replaced foot

Tek_wp1000af_honeywell_tag.jpeg|Tag added by Honeywell - indicates the later usage of this mainframe