Bridged T-coil

The (bridged) T-coil is a circuit topology that extends signal bandwidth.
A bridged T coil is a circuit configuration with a capacitor from input to resistive load and extends signal bandwidth (as does an unbridged T coil). The bridged T coil can also turn a complex load impedance such as an RC or a series RLC into a purely resistive load at all frequencies. A regular (not bridged by a capacitor) T coil cannot do the latter.
Bob Ross used Wang Algebra to derive equations for many different forms of the T coil. He has delivered multiple papers on high frequency design internationally.
Jim Williams wrote[1]:
In about 1966 Carl Battjes figured out a way to use T-coil bandwidth boosting with transistors, which, of course, everyone knew was impossible. He applied T-coils to the 50 MHz 453, tripled the bandwidth, & begat the 454, which had an astonishing 150 MHz BW.
I learned about T-coils in the 1960s at UC Berkeley from Ivan Frisch, either a newly-minted Ph.D. or a graduate student, in a Network Theory course. When the series of Bott-Duffin papers appeared in the 1950s, Ivan Frisch probably learned Wang Algebra from them as part of his literature investigation.
I do not know who brought T-coil know-how to Tektronix, but I suspect it might have been Carl Battjes. He got his MSEE at Stanford, where he may have picked up T-coils. Carl spread the know-how to new engineers in his internal AFTR (amplifier frequency and time response) course, and many engineers posted his one-page summary of T-coil equations on their cubical walls. John Addis and others made physical contributions. I do not know who created a bond-wire version, it may have been Hans Springer.
At Tek, I joined Oliver Dalton’s team after a brief learning stint in evaluation engineering. Oliver’s group was responsible for portable oscilloscopes. I worked on other projects, but sat kitty-corner from Carl. He was working on PCB T-coils for the 454 oscilloscope project. Carl used and taught a simplified bipolar transistor model with a series base resistance and capacitor input so that simplified mathematical analysis could be done to still get good results. Because I was too impatient to follow the conventional derivations for T-coil equations at that time, I derived the standard T-coil equations in my own way starting with the constant-R assumption and Wang Algebra.
Wang Algebra was a short-cut for the network theory method taught at that time for enumerating tree products.
Links
- "Who Wakes the Bugler?", in The Art and Science of Analog Circuit Design, Jim Williams (Ed.), July 1998. ISBN 978-0-7506-7062-3.
- B. Razavi, The Bridged T-Coil, A Circuit for All Seasons. IEEE Solid-State Circuits Magazine, Fall 2015
- Paul Rako, What’s All This T-Coil Stuff, Anyhow? electronicdesign.com, 2019
- Bob Ross, T-Coil Topics DesignCon IBIS Summit, Santa Clara, CA, 2011
- P. Starič, E. Margan, Wideband Amplifiers, Part 2: Inductive Peaking Circuits
- Dennis Feucht, Handbook of Analog Circuit Design. New York: Academic Press, 1990
- E. L. Ginzton, W. R. Hewlett, J. H. Jasberg, J. D. Noe, Distributed Amplification. Proceedings of the IRE, pp 956-969, August 1948.
Documents Referencing Bridged T-coil
- (no results)
Patents that may apply to Bridged T-coil
| Page | Title | Inventors | Filing date | Grant date | Links |
|---|---|---|---|---|---|
| Patent US 2173914A | Thermionic valve amplifier circuits | William Spencer Percival | 1937-12-31 | 1939-09-26 | Bridged T-coil |
| Patent US 3532982A | Transmission line termination circuit | Donald F Zeidlhack • Richard K White | 1967-01-03 | 1970-10-06 | Bridged T-coil • P6047 • P6053 • P6053A • P6053B |
References