The Tektronix TDS2014 is a four-channel, 100 MHz, 1 GS/s digital scope with a color LCD screen.
Thee MATH MENU button provides waveform adjustments (CH1-CH2, CH2-CH1, CH3-CH4, CH4-CH3, CH1+CH2, CH3+CH4) along with FFT (spectrum, harmonics, distortion, noise, impulse, vibration) measurements. Measurements can also be performed for time (frequency) and voltage (amplitude). Repetitive signals can be captured and averaged to remove noise, or captured as a single-shot signal.
Triggering of signal capturing is available through a comprehensive TRIG MENU providing Edge (rising or falling), Video (NTSC, PAL, SECAM), and Pulse Width (or Glitch) triggering on CH1, CH2, CH3, CH4, Ext and AC Line sources.
|Bandwidth and Channels||100 MHz; Bandwidth is 20 MHz at 2 mV/div; 4 Channels|
|Vertical Sensitivity||2 mV to 5 V/div with calibrated fine adjustment|
|Time Base Range||5 ns to 50 s/div|
|Sample Rate||1.0 GS/s on each channel|
|Record Length||2.5 K points|
|Automatic Waveform Measurements||Period, Frequency, +Width, -Width, Rise Time, Fall Time, Max, Min, Peak-to-Peak, Mean, Cycle RMS|
|Waveform Processing||Operators (Add, Subtract, FFT); FFT (Windows: Hanning, Flat Top, Rectangular; 2048 sample points; Autoset Menu (Single-button, automatic setup of all channels for vertical, horizontal, and trigger systems with undo autoset)|
|Autoset Menu||Square Wave (Single-cycle, Multi-cycle, Rising or Falling Edge); Sine Wave (Single-cycle, Multi-cycle, FFT Spectrum); Video (NTSC, PAL, SECAM) Field: All, Odd or Even Line:All or Selective Line Number|
- please add