Page values for "2797"

"_pageData" values

1 row is stored for this page

Field	Field type	Value
_creationDate	`Datetime`	2018-08-17 2:43:34 PM
_modificationDate	`Datetime`	2021-08-10 11:34:42 AM
_categories	List of `String`, delimiter: `\|`	Introduced in 1993 • Manual needed • Spectrum analyzers
_isRedirect	`Boolean`	No
_pageID	`Integer`	15,099
_pageName	`Page`	2797
_pageTitle	`String`	2797
_pageNamespace	`Integer`	0

20 rows are stored for this page

Field	Field type	Value
Parameter	`String`	Frequency
Value	`Wikitext`	100 Hz to 7.1 GHz

Field	Field type	Value
Parameter	`String`	Frequency Span
Value	`Wikitext`	100 Hz to 4 GHz (plus 0 Hz and MAX)

Field	Field type	Value
Parameter	`String`	Resolution Bandwidth
Value	`Wikitext`	6 dB bandwidths from 10 Hz to 3 MHz

Field	Field type	Value
Parameter	`String`	RF Input impedance
Value	`Wikitext`	50 Ω

Field	Field type	Value
Parameter	`String`	Maximum Safe Input Power
Value	`Wikitext`	1 Watt (+30 dBm) CW, or 75 W peak, 1 µs, 0.1% duty factor

Field	Field type	Value
Parameter	`String`	RF Attenuator
Value	`Wikitext`	0 dB to 60 dB, 10 dB steps

Field	Field type	Value
Parameter	`String`	Reference Level
Value	`Wikitext`	−117 dBm to +30 dBm

Field	Field type	Value
Parameter	`String`	LO Output
Value	`Wikitext`	(2 to 6 GHz) 1st LO: +6 dBm to +20 dBm; 2nd LO: −12 dBm to +5 dBm

Field	Field type	Value
Parameter	`String`	Sweep Speed
Value	`Wikitext`	100 s to 200 µs in 1, 2, 5 sequence

Field	Field type	Value
Parameter	`String`	Video Bandwidth
Value	`Wikitext`	0.3 Hz to 30 kHz

Field	Field type	Value
Parameter	`String`	Triggering Modes
Value	`Wikitext`	Free Run, Line, Video, Single, Ext

Field	Field type	Value
Parameter	`String`	Displayed Average Noise
Value	`Wikitext`	−75 dBm to −130 dBm

Field	Field type	Value
Parameter	`String`	Display Dynamic Range
Value	`Wikitext`	90 dB

Field	Field type	Value
Parameter	`String`	Dynamic Range
Value	`Wikitext`	130 dBm (Compression to noise)

Field	Field type	Value
Parameter	`String`	Included Accessories
Value	`Wikitext`	Operator’s Manual; Programmer’s Manual; 6-ft, 50 Ω coaxial cable, N-N; 18-inch, 50 Ω coaxial cable, BNC-BNC; N male to BNC female adapter; rear connector shield; power cord and spare fuses; CRT filter set consisting of amber and gray light filters plus mesh filter

Field	Field type	Value
Parameter	`String`	Weight
Value	`Wikitext`	20.8 kg (45 lbs)

Field	Field type	Value
Parameter	`String`	Power
Value	`Wikitext`	90 − 132 V_AC, 47 – 63 Hz, 210 W max; 180 – 250 V_AC, 47 – 63 Hz

Field	Field type	Value
Parameter	`String`	Additional Features
Value	`Wikitext`	Continuous resolution frequency tuning built-in frequency counters sensitivity to -134 dBm built-in signal processing/marker functions push-button Occupied Bandwidth/Noise Normalization functions macro capability with nonvolatile memory optional switch-selectable 50/75Ω impedance

Field	Field type	Value
Parameter	`String`	Front Panel Inputs/Outputs
Value	`Wikitext`	RF INPUT 50 Ω (N connector); 1ST LO OUTPUT (SMA connector); 2ND LO OUTPUT (SMA connector); CAL OUT (BNC connector, 100 MHz ±10 Hz, −20 dBm ±0.3 dB)

Field	Field type	Value
Parameter	`String`	Rear Panel Inputs/Outputs
Value	`Wikitext`	GPIB interface PROBE POWER HORIZ/TRIG (EXT IN, BNC connector − AC coupled trigger input in External Triggering mode; DC coupled input for horizontal sweep voltage when TIME/DIV in EXT) MARKER/VIDEO (EXT IN, BNC connector − Interfaces to a 1405 TV Adapter to display an externally-generated marker) HORIZ (OUTPUT, BNC connector − 110 MHz IF output as an input into the PEN LIFT connector / alternately supplies a 0.5 V/div horizontal signal) VERT (OUTPUT, BNC connector − video signal, 0.5 V/div); PEN LIFT (OUTPUT, BNC connector − TTL compatible signal to lift the pen of a chart recorder during sweep retrace) 10 MHz IF (OUTPUT, BNC connector) EXT REF IN (BNC connector, 50 Ω input for a 1, 2, 5, or 10 MHz ext ref signal) J104 ACCESSORY (female DB25 connector, external inputs and outputs to instrument bus))

1 row is stored for this page