Sampling oscilloscope: Difference between revisions

From TekWiki
Jump to navigation Jump to search
(added more literature links)
No edit summary
Line 2: Line 2:
Through the 1960s, the sampling group was led by [[Al Zimmerman]].
Through the 1960s, the sampling group was led by [[Al Zimmerman]].


A distinction is made between sequential sampling and [[random sampling]].
A distinction is made between real-time and equivalent time sampling. Real-time sampling requires a sampling rate of at least twice the highest signal bandwidth to capture the signal without artifacts. It is rare with analog oscilloscopes, but the method of choice for low to medium speed digital oscilloscopes, and allows for single shot waveform aquisition.
 
Equivalent time sampling requires repetitive signals but allows to capture a fast signal with a sampling rate much slower than the signal bandwidth. It is further divided into sequential, and [[random sampling]].
Instruments that have a random sampling mode usually also have a sequential sampling mode, e.g., the [[7T11]].
Instruments that have a random sampling mode usually also have a sequential sampling mode, e.g., the [[7T11]].



Revision as of 08:52, 4 June 2022

Tektronix made oscilloscopes and plug-ins intended for sampling measurements. Through the 1960s, the sampling group was led by Al Zimmerman.

A distinction is made between real-time and equivalent time sampling. Real-time sampling requires a sampling rate of at least twice the highest signal bandwidth to capture the signal without artifacts. It is rare with analog oscilloscopes, but the method of choice for low to medium speed digital oscilloscopes, and allows for single shot waveform aquisition.

Equivalent time sampling requires repetitive signals but allows to capture a fast signal with a sampling rate much slower than the signal bandwidth. It is further divided into sequential, and random sampling. Instruments that have a random sampling mode usually also have a sequential sampling mode, e.g., the 7T11.

Scopes

Plug-ins

Reading