491: Difference between revisions

491 (view source)

Revision as of 14:42, 8 July 2019

1 byte removed , 8 July 2019

no edit summary

Jyohe

1,192

edits

@@ Line 22: / Line 22: @@
 The '''Tektronix 491''' is a spectrum analyzer with a frequency range of 10 MHz to 40 GHz.  The minimum resolution bandwidth is 1 kHz, and provides measurement resolution proportional to the frequency accuracy or span.
-Front panel inputs/outputs are: RF INPUT (A) [[BNC connector]] (50Ω, 10 MHz to 275 MHz); RF INPUT (B) [[N connector]] (50Ω, 275 MGHz to 2 GHz); WAVEGUIDE (C) [[N connector]] (50Ω; 12.4 GHz to 40 GHz); and a dual function 1 MHz MARKERS OUT [[BNC connector]] (With the INT REF FREQ in the ON position a 1 MHz marker outputs to this connector.  With the INT REF FREQ in the OFF position EXT REF FREQ IN “same” [[BNC connector]] accepts an external signal between 1 MHz and 5 MHz (1 to 5 V peak to peak) applied to the connector becomes the reference frequency for the phase lock operation).
+Front panel inputs/outputs are: RF INPUT (A) [[BNC connector]] (50Ω, 10 MHz to 275 MHz); RF INPUT (B) [[N connector]] (50Ω, 275 MHz to 2 GHz); WAVEGUIDE (C) [[N connector]] (50Ω; 12.4 GHz to 40 GHz); and a dual function 1 MHz MARKERS OUT [[BNC connector]] (With the INT REF FREQ in the ON position a 1 MHz marker outputs to this connector.  With the INT REF FREQ in the OFF position EXT REF FREQ IN “same” [[BNC connector]] accepts an external signal between 1 MHz and 5 MHz (1 to 5 V peak to peak) applied to the connector becomes the reference frequency for the phase lock operation).
 Rear panel inputs/outputs are: TRIG IN [[BNC connector]] (20 Hz to 100 kHz, ≥0.2V); SAW OUT [[BNC connector]] (75mV/div); and RECORDER [[BNC connector]] (≥4 mV/div of displayed signal in LIN mode, DC-coupled, into 600Ω load impedance).