DC505
The Tektronix DC505 is a 225 MHz counter/timer plug-in for the TM500 system.
It was superseded by the DC505A in 1976.
Key Specifications
Frequency range | 0 Hz (DC coupled) / 10 Hz (AC coupled) to 225 MHz |
---|---|
Sensitivity | 50 mVRMS to 150 MHz, 100 mVRMS to 225 MHz (sine) |
Resolution | 7 digits |
Gate time | 0.01 s to 10 s in decade steps |
Stability | Standard: 1×10−5; Opt.1: 5×10−7 (0°C to +50°C, after 30 min warm-up) |
Long-term drift | Standard: 1×10−5 per month; Opt.1: 5×10−7 per month |
Features |
|
Options |
|
Links
Documents Referencing DC505
Document | Class | Title | Authors | Year | Links |
---|---|---|---|---|---|
070-2088-00.pdf | Book | TM500 Series Rear Interface Data Book | 1975 | AF501 • AM501 • AM502 • DC501 • DC502 • DC503 • DC504 • DC505 • DC505A • DM501 • DM502 • FG501 • FG502 • FG503 • MR501 • PG501 • PG502 • PG505 • PG506 • PG508 • PS501 • PS502 • PS503 • PS503A • PS505 • RG501 • SC501 • SC502 • SG502 • SG503 • TG501 | |
070-2088-01.pdf | Book | TM500 Series Rear Interface Data Book | 1976 | AF501 • AM501 • AM502 • AM511 • DC501 • DC502 • DC503 • DC504 • DC505 • DC505A • DD501 • DM501 • DM502 • FG501 • FG502 • FG503 • FG504 • LA501 • MR501 • PG501 • PG502 • PG505 • PG506 • PG508 • PS501 • PS502 • PS503 • PS503A • PS505 • RG501 • SC501 • SC502 • SG502 • SG503 • SG504 • SW503 • TG501 • TR501 • TR502 |
Rear Interface
Connector Pin | Signal | Connector Pin | Signal |
---|---|---|---|
27A | Internal Scan Clock Disable | ||
26B | Manual Start-Stop | 26A | /RESET |
25B | Internal Scan Clock Out | 25A | Time Slot Zero |
24B | Internal Scan Clock Out | ||
23B | Overflow | ||
21B | BCD output 2 | ||
20B | BCD output 8 | 20A | BCD output 4 |
19B | Data Good | 19A | BCD output 1 |
14A | Ext Clock Input Int 1 MHz out via 200 Ω |
Data is output serially by digit.
Internals
An internal VCO, phase-locked to the 1 MHz master, produces a 100 MHz input to the counter chain for timing measurements.
The DC505 uses a mix of ECL and TTL dividers and logic, and a Mostek MK5007 four-decade counter/latch/multiplexer (U700). Unlike the similarly-specified 7D15, it employs no Tek made custom ICs. The first counter decade is implemented as a divide-by-2 ECL flip-flop (U342, MC1670) followed by a five-stage ring counter made with MC10131 ECL flipflops, and some logic to BCD-encode the count result. A similar circuit exists in the reference divider chain.
In the power supply, a 723 regulator provides +5 V from the 17.5 VAC mainframe rails using the mainframe's NPN pass transistor. Its output includes a zener/SCR crowbar circuit. Another 723 provides +15 V from the +33 V rail. A discrete regulator using the PNP pass transistor produces –10 V from the –33 V rail.
Pictures
-
DC505
Components
Some Parts Used in the DC505
Part | Part Number(s) | Class | Description | Used in |
---|---|---|---|---|
2N4249 | 151-0342-00 | Discrete component | PNP Si low noise amp. | DC501 • DC502 • DC503 • DC503A • DC504 • DC504A • DC505 • DC505A • DC508 • DC508A • DC509 • DC510 |
Mostek MK5007 | 156-0409-00 | Monolithic integrated circuit | four-decade BCD counter with latches and output multiplexer | 213 • DC505 • DC505A |