532: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| (8 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
{{Oscilloscope Sidebar | | {{Oscilloscope Sidebar | ||
|manufacturer=Tektronix | |||
summary=5 MHz | |series=500-series scopes | ||
image=Tek 532 on cart.jpg | | |model=532 | ||
caption=Tektronix 532 with [[CA|Type CA plug-in]] | | |summary=5 MHz oscilloscope | ||
introduced=1955 | | |image=Tek 532 on cart.jpg | ||
discontinued=1962 | | |caption=Tektronix 532 with [[CA|Type CA plug-in]] | ||
manuals= | |introduced=1955 | ||
* [ | |discontinued=1962 | ||
|designers= | |||
|manuals= | |||
* [[Media:070-233.pdf|Tektronix 532 Manual]] (OCR) | |||
}} | |||
The '''Tektronix Type 532''' is a 5 MHz oscilloscope [[introduced in 1955]] which accepts [[letter-series and 1-series plug-ins]]. | |||
From the manual: ''"It is specially engineered to get extra dependability through circuit simplicity and conservative tube loading."'' | |||
The 532 uses a [[T52]] CRT with an anode voltage of +2350 V and a cathode voltage of approximately -1650 V. | |||
P2 [[phosphor]] was standard for the 532. P1, P7, and P11 were optional at no charge. | P2 [[phosphor]] was standard for the 532. P1, P7, and P11 were optional at no charge. | ||
| Line 24: | Line 28: | ||
* The 532 has no [[delay line]]; the 531 has a delay line | * The 532 has no [[delay line]]; the 531 has a delay line | ||
* The 532 has a very simple vertical amplifier; the 531 has output cathode followers, presumably to improve the frequency response. Lowering the output impedance of the amplifier raises the frequency of the pole formed by the capacitance of the vertical deflection plates with the output impedance of the vertical amplifier. | * The 532 has a very simple vertical amplifier; the 531 has output cathode followers, presumably to improve the frequency response. Lowering the output impedance of the amplifier raises the frequency of the pole formed by the capacitance of the vertical deflection plates with the output impedance of the vertical amplifier. | ||
* The 1955 price of a 532 was $825 versus $995 for a 531. | |||
The 532 has a "GATE DELAY" knob and a "DELAYED GATE" output on the front panel. | The 532 has a "GATE DELAY" knob and a "DELAYED GATE" output on the front panel. | ||
The DELAYED GATE output is a 20V positive pulse that is produced at a specified | The DELAYED GATE output is a 20V positive pulse that is produced at a specified point during the sweep. The point is set by the "GATE DELAY" knob. | ||
point during the sweep. The point is set by the "GATE DELAY" knob. | |||
There is also a 532-S7 version, which has single-sweep mode. | There is also a 532-S7 version, which has single-sweep mode. | ||
The Tektronix 532 weighs 52 pounds without a plug-in. | The Tektronix 532 weighs 52 pounds without a plug-in. With a [[D|Type D]] installed, it consumes 475 watts. | ||
With a [[D|Type D]] installed, it consumes 475 watts. | |||
{{MissingSpecs}} | |||
==Pictures== | ==Pictures== | ||
| Line 45: | Line 46: | ||
Tek 532 on cart.jpg | Tek 532 on cart.jpg | ||
</gallery> | </gallery> | ||
{{Parts|532}} | |||
[[Category:500 series scopes]] | [[Category:500 series scopes]] | ||
Latest revision as of 06:31, 7 August 2023
The Tektronix Type 532 is a 5 MHz oscilloscope introduced in 1955 which accepts letter-series and 1-series plug-ins.
From the manual: "It is specially engineered to get extra dependability through circuit simplicity and conservative tube loading."
The 532 uses a T52 CRT with an anode voltage of +2350 V and a cathode voltage of approximately -1650 V. P2 phosphor was standard for the 532. P1, P7, and P11 were optional at no charge.
There is also a rack-mount version, the RM32. The 532 uses 475 watts and weighs 23.5 kg (52 pounds).
Some differences between the 532 and 531:
- The 532 has 5 MHz vertical bandwidth with a Type K plug-in; the 531 is 11 MHz with a Type K.
- The 532 has 8 cm vertical deflection; the 531 has 6 cm vertical deflection.
- The 532 CRT accelerating voltage is 4 kV; the 531 has 10 kV accelerating voltage.
- The 532 has no delay line; the 531 has a delay line
- The 532 has a very simple vertical amplifier; the 531 has output cathode followers, presumably to improve the frequency response. Lowering the output impedance of the amplifier raises the frequency of the pole formed by the capacitance of the vertical deflection plates with the output impedance of the vertical amplifier.
- The 1955 price of a 532 was $825 versus $995 for a 531.
The 532 has a "GATE DELAY" knob and a "DELAYED GATE" output on the front panel. The DELAYED GATE output is a 20V positive pulse that is produced at a specified point during the sweep. The point is set by the "GATE DELAY" knob.
There is also a 532-S7 version, which has single-sweep mode.
The Tektronix 532 weighs 52 pounds without a plug-in. With a Type D installed, it consumes 475 watts.
Key Specifications
- please add
Pictures
-
532
-
RM32 with custom-order green front panel (rear panel is normal blue)
-
Vertical Amplifier Schematic
-
Some Parts Used in the 532
| Part | Part Number(s) | Class | Description | Used in |
|---|---|---|---|---|
| 6BQ7A | 154-028 • 154-0028-00 • 157-0022-00 • 157-0003-00 | Vacuum Tube (Dual Triode) | dual triode | 107 • 163 • 181 • 310 • 315 • 316 • 360 • 524 • 531 • 532 • 535 • 536 • 541 • 545 • 570 • T |
| T0520 | 154-0093-00 • 154-0097-00 • 154-0102-00 • 154-0103-00 • 154-0129-00 • 154-0162-00 • 154-0176-00 • 154-0343-00 | CRT | 5" CRT | 525 • 532 • 570 • 575 |