View source for Bently Nevada 5110 Mod 709V

{{Oscilloscope Sidebar |
  title=5110 Mod 709V for Bently Nevada  |
  summary=[[5110]] modified for radial vibration display |
  image=Bently-nevada-5110-mod-709v-4-crop.jpg |
  caption=5110 Mod 709V for Bently Nevada |
  introduced=(?) |
  discontinued=(?) |
  manuals=See main text
}}

Mod 709V appears to be an adaptation of [[5110]] scopes for radial vibration display made by Tektronix in Beaverton for [https://en.wikipedia.org/wiki/Bently_Nevada Bently Nevada] and possibly others.

Externally evident elements of the modification touch several components:
* Mainframe:
** Graticule illumination added with Tektronix control knob
** Intensity input BNC changed to yellow binding post
** Bently Nevada name & logo on the two noted examples
* 5B10N:
** External input BNC changed to green binding post
** "Display" color key area expanded to include what appears to be a three-way switch with positions
*** Normal
*** L vs R <unintelligible>
*** L vs R
** Cal control deleted
* 5A19N (two):
** Inverting input red binding posts changed to light blue
** Cal control deleted

Example scope serial numbers:
* B1217xx
* B1303yy

== Sources ==

Noted in February 2021 on [http://web.archive.org/web/20210207002755/https://www.ebay.com/itm/143483702797 eBay] and found also listed by but not available from [http://web.archive.org/web/20210207002439/https://www.nriparts.com/products/tektronix-5110-mod-709v/325390 NRI Industrial Sales]. Photos come from these two public listings.

== Case ==

Both noted examples include a robust travel case, but the cases differ.

== Findings ==

[http://web.archive.org/web/20060918095638/https://www.engr.colostate.edu/me/facil/dynamics/bentlystart.htm This page] describes connecting "Bently equipment" X & Y [http://web.archive.org/web/20210207033141/https://dam.bakerhughesds.com/m/289a76745358674d/original/Proximitor-Trifold.pdf "Proximitor"] signals and a [http://web.archive.org/web/20210207032233/https://dam.bakerhughesds.com/m/22d0219c69acbaf5/original/3500-25-Enhanced-Keyphasor-Module-Datasheet-141532-pdf.pdf "Keyphasor"] signal via an "Oscilloscope Interface" to an unspecified oscilloscope. Bently Nevada, now "a Baker Hughes business", continues to sell current Proximitor and Keyphasor products per linked literature dated 2019 and 2020. The Bently Nevada [http://web.archive.org/web/20210207035108/https://nvms.com.au/wp-content/uploads/2018/02/tk21-oscilloscope-interface_datasheet_141582.pdf TK21 Oscilloscope Interface] appears to have superseded the modified oscilloscope. Details for that device appear consistent with Mod 709V.

==Manual insert excerpts==
Excerpts transcribed from microfiche by Håkan H./Zenith5106; headings adapted for formatting.

<blockquote>
'''5110 MOD 709V'''

<blockquote>
'''DESCRIPTION'''

This manual describes MOD 709V as it applies to the
TEKTRONIX 5110 Single Beam Oscilloscope.  MOD 709V
adds a new circuit board for X-Y operation using Right
Vertical versus Left Vertical. Using a TEKTRONIX 5B10N
MOD 709V Time Base plug-in unit, the SECONDS/DIV or
VOLTS/DIV switch is turned to the L versus R position
actuating a switching relay mounted in the mainframe. This
bypasses the normal sweep function of the 5B10N, allowing
for a Left Vertical versus Right Vertical X-Y display. The
display unit portion of the 5110 is supplied with an
illuminated graticule with a special implosion shield, and an
AC coupled EXT INTENSITY INPUT via a yellow binding post
at the front panel.

'''BANDWIDTH'''

Maximum horizontal deflection bandwidth
(using a 5A15N or 5A18N amplifier) is reduced by 
approximately 300 kHz by the added wiring. Bandwidth (-3 dB)
for X-axis deflection from either the center or right compartment
is 1.7 MHz minimum. The Y-axis specification is unchanged.

'''CALIBRATION'''

Check the interconnecting wiring to the added  X-Y circuit board, 
then calibrate MOD 709V according to the procedure in the 5110 
Instruction Manual.
</blockquote>

'''5A19N MOD 709V'''

<blockquote>
'''DESCRIPTION'''

This manual insert describes the features of MOD 709V as installed in the 5A19N 
Differential Amplifier. The Signal Input connector has been changed to a blue 
binding post for the Minus Input. The Variable VOLTS/DIV control labeled CAL 
has been removed. A +15 Volts offset, regardless of the VOLTS/DIV control 
setting has been added


'''CALIBRATION'''

Calibrate the same as standard with the following additions regarding offset.

Check OFFSET for ±15 volts in all Volts/Div positions.

1. Ground amplifier inputs and set display in center screen with 
     OFFSET in OFF position, and Volts/Div in .5 Volt/Div position.

2. Turn OFFSET to ON position and position trace 1 cm above center
    screen.  Plus  .5 volts OFFSET.

3. Change Volts/Div to .2 position. Trace should now be 2-1/2 cm 
    above center screen.  If trace shifts toward center screen instead, 
    offset strap on board is in wrong position.   Strap should be in 
    position #2.
</blockquote>

'''5B10N MOD 709V'''
<blockquote>
'''DESCRIPTION'''

This manual insert describes the features of MOD 709V as installed in the 5B10N
Time Base Amplifier. It removes the VAR control, changes the BNC EXT INPUT 
connector to a green binding post and provides a switching mode for 
Left Vertical vs Right Vertical, The last ccw position of the SECONDS/DIV or
VOLTS/DIV (EXT) switch is now labeled L vs R.


'''CALIBRATION'''

Calibrate this instrument the same as standard except as follows:

1. Variable TIME/DIV is deleted - no checks required.

2. Fully ccw position of TIME/DIV switch used to be EXT INPUT .5 VOLTS
    PER DIV. This feature is deleted and is now marked L vs R (left vertical versus
    right vertical). In this position check to see that -30 volts is present at
    contact A-12 of interface connector. Voltage should not appear at A-12 in any
    other position of timing switch.
</blockquote>
</blockquote>

The 5B10N rotary switch position described in the manual insert differs from the separate switch apparent in the examples.

==Pictures==
<gallery>
Bently-nevada-5110-mod-709v-1.jpg
Bently-nevada-5110-mod-709v-2.jpg
Bently-nevada-5110-mod-709v-3.jpg
Bently-nevada-5110-mod-709v-4.jpg
Bently-nevada-5110-mod-709v-4-crop.jpg
Bently-nevada-5110-mod-709v-7.jpg
Bently-nevada-5110-mod-709v-8.jpg
Bently-nevada-5110-mod-709v-a.jpg
Bently-nevada-5110-mod-709v-b.jpg
Bently-nevada-5110-mod-709v-g.jpg
</gallery>

{{MissingSpecs}}


[[Category:Third-party products]]
[[Category:5000 series non-storage mainframes]]
[[Category:Special-purpose oscilloscopes]]
[[Category:Manual needed]]