1 row is stored for this page
Field | Field type | Value |
---|
_creationDate | Datetime | 2011-05-20 2:38:59 AM |
_modificationDate | Datetime | 2023-10-12 4:33:27 PM |
_categories | List of String, delimiter: | | Introduced in 1987 • Spectrum analyzers |
_isRedirect | Boolean | No |
_pageID | Integer | 1,579 |
_pageName | Page | 2754 |
_pageTitle | String | 2754
|
_pageNamespace | Integer | 0 |
1 row is stored for this page
Field | Field type | Value |
---|
Manufacturer | Page | Tektronix |
Model | String | 2754P |
Class | String | Spectrum Analyzer |
Description | Wikitext string | 21 GHz Spectrum Analyzer
|
Series | Page | |
Introduced | Text | 1987 |
Designers | List of Page, delimiter: ; | |
Discontinued | Text | 1993 |
20 rows are stored for this page
Field | Field type | Value |
---|
Parameter | String | Frequency |
Value | Wikitext | 10 kHz to 21 GHz
|
Field | Field type | Value |
---|
Parameter | String | Frequency Span (plus 0 Hz and MAX) |
Value | Wikitext | 200 Hz/div to 1 GHz/div in 1-2-5 sequence
|
Field | Field type | Value |
---|
Parameter | String | Resolution Bandwidth |
Value | Wikitext | 6 dB bandwidths from 1 kHz to 3 MHz in decade steps
|
Field | Field type | Value |
---|
Parameter | String | RF Input impedance |
Value | Wikitext | 50 Ω
|
Field | Field type | Value |
---|
Parameter | String | Maximum Safe Input Power |
Value | Wikitext | - CW Power: 1 Watt (+30 dBm);
- Pulse Power: 75 W peak (1 µs pulse width, 0.1% duty factor)
|
Field | Field type | Value |
---|
Parameter | String | RF Attenuator |
Value | Wikitext | 0 dB to 60 dB, 10 dB steps
|
Field | Field type | Value |
---|
Parameter | String | Reference Level |
Value | Wikitext | -117 dBm to +40 dBm (+30 dBm maximum safe input)
|
Field | Field type | Value |
---|
Parameter | String | LO Output Power (2 to 6 GHz) |
Value | Wikitext | 1st LO: +7.5 dBm to +15 dBm; 2nd LO: -22 dBm to +15 dBm; Must be terminated into 50 Ω when they are not connector to an external device
|
Field | Field type | Value |
---|
Parameter | String | Sweep Speed |
Value | Wikitext | 5 s to 2 µs in 1, 2, 5 sequence (10 s/div in auto)
|
Field | Field type | Value |
---|
Parameter | String | Video Bandwidth |
Value | Wikitext | 3 Hz to 30 kHz
|
Field | Field type | Value |
---|
Parameter | String | Triggering Modes |
Value | Wikitext | Internal, External, Line, Free Run
|
Field | Field type | Value |
---|
Parameter | String | Displayed Average Noise |
Value | Wikitext | −115 dBm
|
Field | Field type | Value |
---|
Parameter | String | Display Dynamic Range |
Value | Wikitext | 80 dB
|
Field | Field type | Value |
---|
Parameter | String | Dynamic Range (Compression to noise) |
Value | Wikitext | 134 dBm
|
Field | Field type | Value |
---|
Parameter | String | Calibrator (Cal out) |
Value | Wikitext | 50Ω, -20 dBm ±0.3 dB at 100 MHz
|
Field | Field type | Value |
---|
Parameter | String | Included Accessories |
Value | Wikitext | Operator’s Manual; Programmer’s Manual; 6 ft, 50Ω coaxial cable, N-N; 18-inch, 50Ω coaxial cable, BNC-BNC; N male to BNC female adapter; rear connector shield; power cord, power cord clamp, and spare fuses; CRT filter set consisting of amber and gray light filters plus mesh filter
|
Field | Field type | Value |
---|
Parameter | String | Weight |
Value | Wikitext | 27 kg (60 lbs)
|
Field | Field type | Value |
---|
Parameter | String | Power |
Value | Wikitext | 90 − 132 VAC, 48 to 448 Hz; 180 – 250 VAC, 48 to 72 Hz. At 115 VAC, 60 Hz, 210 W max with all options
|
Field | Field type | Value |
---|
Parameter | String | Operating Atmospherics |
Value | Wikitext | Temperatures: 0 °C to +50 °C; Humidity: 95% below +30 °C, 75% above +30 °C, 45% above +40 °C; Altitude: Up to 3 km (10,000 ft)
|
Field | Field type | Value |
---|
Parameter | String | GPIB Characteristics |
Value | Wikitext | P Version: In accordance with IEEE Standard 488-1978 implemented as SH1, AH1, T5, L3, SR1, RL1, PP1, DC1, DT1, and C0; Non-P Version (Plotter Output): Implemented as SH1, AH0, T3, L0, SR0, RL0, PP0, DC0, DT0, and C0
|