Page values for "491"

491

40 GHz Spectrum Analyzer

• Coaxial Input Bands 10 MHz to 12.4 GHz (Band A-1 10 MHz to 275 MHz; Bands B-2 & 3: 275 MHz to 2 GHz; Bands C-4, 5, & 6: 1.5 GHz to 12.4 GHz)
• External Waveguide mixers: 12.4 MHz to 40 GHz (Band 7 (Ku) 12.4 GHz to 18 GHz; Band 8 (K) 18 GHz to 26.5 GHz, (Ka) 18 GHz to 40 GHz)

(plus 0 Hz) 200 kHz/div to 10 MHz/div in 1−2−5 sequence

1 kHz to 100 kHz (6 dB)

50 Ω, max. −30 dBm for linear operation, +15 dBm (25 mW) diode mixer power limit

0 dB to 51 dB, in combinations of 1, 2, 4, 8, 16, and 20 dB

0.5 s/div to 10 µs/div in 1, 2, 5 sequence; Uncalibrated to approx 1.25 s/div

Internals, External, and Line; 100 V maximum input (DC + peak AC)

80 dB (Max sensitivity of −110 dBm minus Max input power of −30 dBm); display range ≥40 dB

200 MHz

13.6 kg / 30 lbs (Rackmount version 18 kg / 40 lbs)

90−136 and 180−272 V_AC in six ranges, 48−440 Hz. At 115 V_AC, 60 Hz, 55 W

• RF INPUT (A) BNC connector (50 Ω, 10 MHz to 275 MHz)
• RF INPUT (B) N connector (50 Ω, 275 MHz to 2 GHz)
• WAVEGUIDE (C) − receptacle that accommodates either a coaxial mixer, 119-0096-00, with an N connector input for 1.5 to 12.4 GHz, or a 119-0104-00 waveguide mixer adapter connecting to external mixers for up to 40 GHz.
• MARKERS OUT/EXT REF FREQ IN BNC connector: 1 MHz marker output when INT REF FREQ set to ON, otherwise PLL reference frequency input (1−5 MHz, 1−5 V_p-p)

• TRIG IN BNC connector (20 Hz to 100 kHz, ≥0.2 V)
• SAW OUT BNC connector (75 mV/div)
• RECORDER BNC connector (≥4 mV/div of displayed signal in LIN mode, DC-coupled, into 600 Ω)