RG501: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 4: | Line 4: | ||
* [http://w140.com/smb/RG501_SM.pdf Tektronix RG501 Manual (late, OCR, PDF)] | * [http://w140.com/smb/RG501_SM.pdf Tektronix RG501 Manual (late, OCR, PDF)] | ||
}} | }} | ||
It produces a linear ramp signal adjustable up to 10 V amplitude, positive or negative, with a duration from 10 μs to 10 s (equivalent to 1 μs/Div to 1 s/Div | |||
on a typical oscilloscope's X scale). Additionally, the RG501 provides a 3 V (TTL compatible) gate signal (high while ramp running). | |||
{{ | The ramp can be triggered from an external input, an internal trigger signal (via the backplane), the line frequency, or can be free-running (Auto Trig mode). | ||
A typical application of the RG501 is to sweep a voltage-controlled function generator's frequency, e.g. when used with with the [[FG501]]. | |||
{{BeginSpecs}} | |||
{{Spec | Ramp duration | Fixed, 10 μs to 1 s in decade steps, variable multiplier ×1 to (min.) ×10 (i.e. max. 10 s) }} | |||
{{Spec | Amplitude | variable from ~50 mV to 10 V, selectable polarity }} | |||
{{Spec | Trigger | Sensitivity 200 mV<sub>p-p</sub>, Level ±1 V, input impedance 10 kΩ }} | |||
{{Spec | Gate output | 3 V, 160 Ω source impedance }} | |||
{{EndSpecs}} | |||
==Links== | ==Links== | ||
| Line 12: | Line 23: | ||
==Pictures== | ==Pictures== | ||
<gallery> | <gallery> | ||
Rg501.jpg | |||
</gallery> | </gallery> | ||
Revision as of 08:03, 30 December 2016
The Tektronix RG501 is a ramp generator plug-in for the TM500 system.
It produces a linear ramp signal adjustable up to 10 V amplitude, positive or negative, with a duration from 10 μs to 10 s (equivalent to 1 μs/Div to 1 s/Div on a typical oscilloscope's X scale). Additionally, the RG501 provides a 3 V (TTL compatible) gate signal (high while ramp running).
The ramp can be triggered from an external input, an internal trigger signal (via the backplane), the line frequency, or can be free-running (Auto Trig mode).
A typical application of the RG501 is to sweep a voltage-controlled function generator's frequency, e.g. when used with with the FG501.
Key Specifications
| Ramp duration | Fixed, 10 μs to 1 s in decade steps, variable multiplier ×1 to (min.) ×10 (i.e. max. 10 s) |
|---|---|
| Amplitude | variable from ~50 mV to 10 V, selectable polarity |
| Trigger | Sensitivity 200 mVp-p, Level ±1 V, input impedance 10 kΩ |
| Gate output | 3 V, 160 Ω source impedance |