5XP: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
The ''' | The '''DuMont 5XP''' is a family of flat-faced 5" CRTs produced from 1948 onward. A 5XP-A series with tighter tolerances followed in 1953,and a 5XP-B range in 1954 that had an aluminized screen for higher brightness. | ||
Compared to earlier tubes, they had improved vertical deflection sensitivity, which was achieved by decreasing vertical deflection plate width and reducing spacing between the plates, at the cost of limiting vertical scan Tomas little as 1.25" at 20 kV acceleration. | |||
Maximum acceleration voltage was 25.5 kV. | |||
They are used in early models of the [[513]] and [[517]], before Tektronix switched these to Tek-made CRTs. | They are used in early models of the [[513]] and [[517]], before Tektronix switched these to Tek-made CRTs. | ||
==Links== | |||
* [http://w140.com/5XP1A.pdf 5XP1A Datasheet (PDF)] | * [http://w140.com/5XP1A.pdf 5XP1A Datasheet (PDF)] | ||
* [http://w140.com/5XP1B.pdf 5XP1B Datasheet (PDF)] | * [http://w140.com/5XP1B.pdf 5XP1B Datasheet (PDF)] | ||
* [http://books.google.at/books/about/The_Cathode_Ray_Tube.html?id=PHIfAQAAIAAJ&redir_esc=y Peter Keller, The Cathode-Ray Tube: Technology, History, and Applications. Palisades Press, 1991. ISBN 0963155903, 9780963155900] p.105 | |||
==Pictures== | |||
<gallery> | <gallery> | ||
Dumont 5xp11 1.jpg | | Dumont 5xp11 1.jpg | DuMont 5XP11 | ||
Dumont 5xp11 2.jpg | | Dumont 5xp11 2.jpg | DuMont 5XP11 | ||
</gallery> | </gallery> | ||
[[Category:Cathode ray tubes]] | [[Category:Cathode ray tubes]] | ||
Revision as of 00:58, 11 March 2017
The DuMont 5XP is a family of flat-faced 5" CRTs produced from 1948 onward. A 5XP-A series with tighter tolerances followed in 1953,and a 5XP-B range in 1954 that had an aluminized screen for higher brightness.
Compared to earlier tubes, they had improved vertical deflection sensitivity, which was achieved by decreasing vertical deflection plate width and reducing spacing between the plates, at the cost of limiting vertical scan Tomas little as 1.25" at 20 kV acceleration.
Maximum acceleration voltage was 25.5 kV.
They are used in early models of the 513 and 517, before Tektronix switched these to Tek-made CRTs.
Links
- 5XP1A Datasheet (PDF)
- 5XP1B Datasheet (PDF)
- Peter Keller, The Cathode-Ray Tube: Technology, History, and Applications. Palisades Press, 1991. ISBN 0963155903, 9780963155900 p.105
Pictures
-
DuMont 5XP11
-
DuMont 5XP11
