PG506: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 9: | Line 9: | ||
Common failure modes: In case of low or no output on the 20 V and above ranges, check Q270, Q280 and Q290. | Common failure modes: In case of low or no output on the 20 V and above ranges, check Q270, Q280 and Q290. | ||
==Pictures== | |||
===PG506 older version=== | |||
<gallery> | <gallery> | ||
Tek PG506 older front.jpg | |||
</gallery> | |||
===PG506 newer version=== | |||
<gallery> | |||
Tek pg506 late.JPG | |||
Tek pg506 left internal.JPG|PG506 Left Internal | Tek pg506 left internal.JPG|PG506 Left Internal | ||
Tek pg506 left internal2.jpg|PG506 Left Internal | Tek pg506 left internal2.jpg|PG506 Left Internal | ||
Tek pg506 right internal.JPG|PG506 Right Internal | Tek pg506 right internal.JPG|PG506 Right Internal | ||
Tek pg506 right internal2.jpg|PG506 Right Internal | Tek pg506 right internal2.jpg|PG506 Right Internal | ||
</gallery> | |||
===PG506A=== | |||
<gallery> | |||
Tek pg506a front.jpg|PG506A Front | Tek pg506a front.jpg|PG506A Front | ||
pg506_new.jpg|Newer version without filter relays | pg506_new.jpg|Newer version without filter relays | ||
Revision as of 05:46, 4 December 2018
The Tektronix PG506 is a 1 MHz calibration generator plug-in for the TM500 system.
There are (at least) two versions of the PG506. The older version has two relays that switch a low-pass (noise) filter into the 10 V and below ranges. The new version just has a capacitor across the output for these ranges.
Common failure modes: In case of low or no output on the 20 V and above ranges, check Q270, Q280 and Q290.
Pictures
PG506 older version
PG506 newer version
-
-
PG506 Left Internal
-
PG506 Left Internal
-
PG506 Right Internal
-
PG506 Right Internal
PG506A
-
PG506A Front
-
Newer version without filter relays
-
PG506A
-
PG506A output waveform
