2465: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 70: | Line 70: | ||
<gallery> | <gallery> | ||
Tek 2445.jpg | Tek 2445.jpg | ||
USA Tektronix 2445 Front0.jpg | USA Tektronix 2445 Front0.jpg | ||
Tek 2445 with dmm.jpg | Tek 2445 with dmm.jpg | ||
Tek knobless 2445.jpg|Prototype Knobless 2445 in VintageTEK Museum | Tek knobless 2445.jpg|Prototype Knobless 2445 in VintageTEK Museum | ||
Revision as of 17:49, 26 April 2019
The Tektronix 2465 is a four-channel 300 MHz portable oscilloscope.
The 2445 is a 150 MHz version.
CRT is the 154-0850-01.
The 2465 is from the penultimate generation of analog Tektronix scopes.
The horizontal amplifier in the 2465 was designed by Art Metz and Ken Schlotzhauer. Art Metz also worked on the triggers. Art Metz and Walt Ainsworth designed the sweeps.
Options
- Option 01 (DMM) added a 4½-digit, fully autoranging digital multimeter which measures DC and AC voltage and current, resistance, dBV, dBm, continuity, and temperature.
- Option 05 (TV) added TV (back-porch) clamp circuitry to the Channel 2 input and TV trigger coupling modes, allowing selection of either horizontal or vertical sync pulses to obtain horizontal-line-sync or field-sync pulse triggering.
- Option 06 (Counter/Timer/Trigger) allows precision time-interval measurement, event and frequency counting, delay-by-events triggering, and logic triggering.
- Option 09 added option 06, the CTT, plus a 17-bit P6407 word recognizer probe.
- Option 10 added a GPIB interface for remote control.
- Option 11 added two probe-power connectors on the rear panel of the instrument. Only shown in the Tektronix catalogues for the 2465A (1987) and 2465B (1989)
- Option 46 is the designation for the military version of the scope (OS-288/G) that included option 10 IEEE-488 interface and 2 probes.
Key Specifications
| — 2445 — | |
| Bandwidth | 150 MHz |
| — 2465 — | |
| Bandwidth | 350 MHz |
| — Common — | |
| Sweep Rate | 500 ps/div |
| Channels | Four independent channels |
| Vertical | 2 mV/div vertical sensitivity |
| Cursors | Delta Volts and Delta Time Cursors |
| CRT Readout | Scale Factors, Trigger Level, Voltage, Time, Frequency, Phase and Ratio Measurements and Mode Indicators |
| Trigger | Advanced Triggering with "Hands Off" Auto Level Triggering |
| Trigger Bandwidth | 500 MHz min. |
| Input Impedance | 50 Ω/1 MΩ inputs with 50 Ω protection |
| Probes | Two P6131 ×10 probes, 1.3 m |
See also
Links
Pictures
2445
-
-
-
-
Prototype Knobless 2445 in VintageTEK Museum
