AWG2005: Difference between revisions

701 bytes removed ,  2 September 2020
no edit summary
No edit summary
No edit summary
Line 1: Line 1:
The '''Tektronix AWG2005''' is an arbitrary waveform generator.
The '''Tektronix AWG2005''' is an arbitrary waveform generator.


Specifications:
{{BeginSpecs}}
 
{{Spec | Frequency  | 0.01 Hz to 20 MHz, 4 Digit resolution }}
Range: .01Hz to 20MHz 4 Digit resolution (Std.) Waveform generator editing Clock (Option 05)
{{Spec | Channels  | 2 outputs (Opt.02: 4 outputs), 12 bit resolution; auxiliary marker output (2 V pulse into 50 Ω) per channel }}
 
{{Spec | Functions  | Sine, triangle, Square, Ramp, Pulse and Arbitrary }}
Memory: 64K x 12 bits Waveform can position 256 data point boundary in the waveform memory, 256 Waveform maximum.
{{Spec | Output    | Range: 50 mV<sub>p-p</sub>to 10 V<sub>p-p</sub> (1 mV increments) into 50 Ω (source impedance 50 Ω), -5 V to +5 V offset (5 mV increments), -200 mA to 200 mA as current source }}
 
{{Spec | Memory     | 64K x 12 bits waveform, can position 256 data point boundary in the waveform memory, 256 waveforms maximum; catalog memory 4 Mb }}
Catalog Memory 4 Mb
{{Spec | Storage   | 512K internal NVRAM (Li battery soldered on main board), 3.5" floppy drive }}
 
{{Spec | Sweep     | Linear, Log, Arbitrary; Continuous, Triggered, Gated modes }}
DA Converter Resolution: 12 bits
{{Spec | Interfaces | [[GPIB]], [[RS-232]]; direct transfers from [[TDS Series scopes|TDS Series]], [[:Category:2200 series scopes|2200]]/[[:Category:2200 series scopes|2400]] series, 11000 Series, [[AFG2020]] or AWG20XX series }}
 
{{Spec | Size      | 160 mm × 360 mm × 490 mm (H/W/L) }}
Internal Storage: NVRAM 512K
{{Spec | Weight     | 10.7 kg (23.5 lb) }}
 
{{Spec | Display    | Monochrome CRT, 640×480px., 132 mm × 99 mm display area }}
Internal Disc Drive:3.5 Inch Floppy Drive
{{Spec | Power     | 90−127 V<sub>AC</sub> / 90−250 V<sub>AC</sub>, 48 to 440 Hz, ≤300 W; fan cooled }}
 
{{EndSpecs}}
Internal Diagnostics and Calibration
 
Optional FPP (Option 09)
 
Sweep Types: Linear, Log, Arbitrary
 
Sweep Modes: Continuous, Triggered, Gated
 
Output Range: 0.05 to 10V pp
 
Offset Range: -5.0 to 5.0V
 
Current Source: -200mA to 200mA
 
Output rated into 50Ohm Load
 
Output Impedance: 50 Ohm
 
Transfer over GPIB or RS-232 Interfaces
 
Direct Transfers Available from TDS Series, 2200 Series,
2400 Series, 11000 Series, AFG 2020 or any AWG20XX Series Instrument
2 Channel (Std) (4 Channels - Option 02)  
 
Std: Weight: 10.7 kg (23.5 Lbs.)
 
Height: 160mm (6.4 in)
 
Width: 360mm (14.3 in) Includes Handle
 
Length A: 490 mm (19.25 in) With Front Cover
 
Length B: 560 mm (22.2 in) Handle Extended
 
CRT: Monochrome 132mm (5.2 in) horizontally by 99mm (3.9 in) vertically
 
CRT Resolution:640H x 480V (Pixels)
 
Backup Battery Type: Li 3 V, 650mAH Soldered to the Back plane connector board. Holds data in the NVRAM when AC power is off.
 
Rated Voltage 100VAC to 240VAC Continuous Range CAT II
 
Range (Low): 90 - 127 VAC 48Hz to 440Hz
 
Range (High):      90 - 250 VAC 48Hz to 63 Hz
 
Power Consumption (MAX): 300W
 
Current (MAX): 4A
 
Operating Temp +10C to +40C
 
Non- Operating: -20C to +60C
 
Max Operating Altitude 4.5km (15000 feet)
 
Cooling: Forced Air 12V Fan
 
Clearance A:  76mm (3 Inches) Top
 
Clearance B:  150mm (6 Inches) Sides
 
Clearance C:  76mm (3 Inches) Rear
 
Reference Oscillator: 12.6 MHz
 
Function Generator: SINE/TRIANGLE/SQUARE/RAMP and PULSE
 
Range: 1Hz to 200kHz
 
Amplitude: Variable from 50mV to 10V in 1mV increments
 
Offset: Variable +/-5V in 5mV increments
 
Polarity: Normal/Inverted
 
Duty (Pulse Only): 0% to 100% in 1% Increments
 
Operating Mode: Continuous Mode
 
Auxiliary Output Marker:  2V into 50Ohm Square Pulse
 


==Manuals==
==Manuals==