P6139: Difference between revisions
Jump to navigation
Jump to search
m (Text replacement - "Category:1 MOhm Oscilloscope Probes" to "Category:1 MΩ Oscilloscope probes") |
m (adding "tds3052") |
||
| Line 9: | Line 9: | ||
{{Spec | Input impedance | 10 MΩ // 8 pF }} | {{Spec | Input impedance | 10 MΩ // 8 pF }} | ||
{{Spec | Length | 1.3 m }} | {{Spec | Length | 1.3 m }} | ||
{{Spec | Intended for | [[TDS500]] series, [[TDS3054]] }} | {{Spec | Intended for | [[TDS500]] series, [[TDS3052]], [[TDS3054]] }} | ||
{{EndSpecs}} | {{EndSpecs}} | ||
Revision as of 05:51, 30 December 2020
The Tektronix P6139 is a passive 500 MHz ×10 scope probe for 1 MΩ // 8-18 pF scope inputs.
It has a ×10 readout pin, and shares accessories with many other Tektronix compact modular probes.
Key Specifications
| Attenuation | 10× |
|---|---|
| Bandwidth | 500 MHz |
| Input impedance | 10 MΩ // 8 pF |
| Length | 1.3 m |
| Intended for | TDS500 series, TDS3052, TDS3054 |
Issues
Unless they've had their cables replaced, they had a whisker- or dendrite-growth problem in the cable that will short out the signal and drive you nuts. It can be cleared by running some current through the BNC connector but only temporarily. The only fix is to order a new cable from Tektronix, which I'm not sure you can still do.
Manuals
Links
Pictures
-
P6139A, full view
-
P6139A, close-up of compensation box
