Rotary input switches/Repairs: Difference between revisions
Jump to navigation
Jump to search
(Created page with "Disassembly steps. 1. Desolder the ground connection from the switch wafer to the retaining ring. 2. Remove the retaining ring 3. Desolder the BNC center pin connection to...") |
No edit summary |
||
| (One intermediate revision by one other user not shown) | |||
| Line 7: | Line 7: | ||
3. Desolder the BNC center pin connection to the wafer and gently pull the wafer out. | 3. Desolder the BNC center pin connection to the wafer and gently pull the wafer out. | ||
[[file:Tek_260-603_Repair.jpeg | | [[file:Tek_260-603_Repair.jpeg |Disassembly steps| 400px]] | ||
[[Category:Instrument repair reports]] | |||
Latest revision as of 07:10, 24 May 2021
Disassembly steps.
1. Desolder the ground connection from the switch wafer to the retaining ring.
2. Remove the retaining ring
3. Desolder the BNC center pin connection to the wafer and gently pull the wafer out.
