P6601/Repairs: Difference between revisions
Jump to navigation
Jump to search
(Created page with "For repair or for building your own temperature sensor you need a PT1-100 sensor and a LEMO connector. The LEMO connector: *Series: S *The diameter: 0S (S-Series, diameter 0)...") |
No edit summary |
||
| Line 12: | Line 12: | ||
As the PT-100 is connected with only 2 wires, each sensor has to be trimmed (offset) in the connected device. | As the PT-100 is connected with only 2 wires, each sensor has to be trimmed (offset) in the connected device. | ||
[[Category:Instrument repair reports]] | |||
Latest revision as of 03:59, 8 May 2023
For repair or for building your own temperature sensor you need a PT1-100 sensor and a LEMO connector.
The LEMO connector:
- Series: S
- The diameter: 0S (S-Series, diameter 0)
- Insert configuration: 302 (2 pins)
The following LEMO configuration is known to fit:
- Connector: FFA0S302CLA (2.2 to 4.4 mm cable)
- Bend relief: GMA0B035 (3.5 to 3.9 mm cable)
As the PT-100 is connected with only 2 wires, each sensor has to be trimmed (offset) in the connected device.