4CX250F: Difference between revisions

Revision as of 12:37, 30 October 2023

The 4CX250F (7204) (P/N 154-0300-00) is a beam power tetrode vacuum tube designed to operate up to 500 MHz with plate voltage up to 2000 V.

It was originally designed as an RF power amplifier tube for transmitters and requires forced air cooling.

The 4CX250F is the same as the 4CX250B (7203), but with a 26.5 V filament instead of a 6 V filament.

The 4CX250F is used in the sweep circuit of the 519.

@@ Line 1: / Line 1: @@
-The '''4CX250F''' (7204) is a beam power tube designed to operate up to 500 MHz with plate voltage up to 2000 V.
+{{Vacuum Tube
+|Type=Tetrode
+|Number=4CX250F (7204)
+|EuroNumber=
+|RussianNumber=
+|Part_nos=154-0300-00
+|Description=beam power tetrode
+|Used_in=519;
+|Designers=
+}} designed to operate up to 500 MHz with plate voltage up to 2000 V.
 It was originally designed as an RF power amplifier tube for transmitters and requires forced air cooling.
@@ Line 6: / Line 16: @@
 ==Data sheets==
-* [http://w140.com/4cx250f.pdf RCA 4CX250F Datasheet (PDF)]
+* [http://w140.com/4cx250f.pdf RCA 4CX250F Datasheet (PDF)] / [http://w140.com/4cx250b.pdf RCA 4CX250B Datasheet (PDF)]
-* [http://w140.com/4cx250b.pdf RCA 4CX250B Datasheet (PDF)]
+* [[tube:4cx250f| 4CX250F]] / [[tube:4cx250b| 4CX250B]] @ radiomuseum.org
 ==Used in==
@@ Line 14: / Line 24: @@
 ==Pictures==
 <gallery>
-Eimac 7203.jpg
+Eimac 4cx250f 1.jpg|Eimac 4CX250F
+Eimac 4cx250f 2.jpg|Eimac 4CX250F
+Eimac 7203.jpg     |Eimac 7203
+Tek-519_timebase_gen.png|Tek 519 Timebase Circuit using 4CX250F (V331)
 </gallery>
 [[Category:Pentodes]]