LA501: Difference between revisions

LA501 (view source)

Revision as of 09:05, 19 November 2023

558 bytes added , 19 November 2023

no edit summary

Peter

Bureaucrats, Interface administrators, Suppressors, Administrators

39,594

edits

@@ Line 1: / Line 1: @@
 {{TM500 | mfg=Tektronix | type=LA501 | function=logic analyzer | class=logic analyzer | image=Tek la501 front.jpg | introduced=1976 | discontinued=1978 |
-manuals=
+designers= |manuals=
-* [http://w140.com/la501w.pdf Tektronix LA501 and LA501A Brochure (PDF)]
+* [[Media:070-1967-00.pdf|Tektronix LA 501 with Options Manual]]
-* [http://w140.com/tek_wr501_1976_vol8no2_tekscope.pdf Article about WR501 and LA501 in Tekscope Magazine, 1976, Vol 8, No 2 (PDF)]
+* [[Media:070-2047-00.pdf|Tektronix LA 501 Operators Manual]]
-* [[Category:Manual needed]] ''please add manual''
+* [[Media:070-2169-00.pdf|Tektronix LA501W Operators Manual]]
+* [[Media:la501w.pdf|Tektronix LA501 and LA501W catalog pages]]
 }}
-It provides X/Y/Z outputs for an external oscilloscope or X/Y monitor. It has a cable-attached passive 16-channel probe, the [[P6450]]. Alternatively, channels 0-3 can be switched to four [[BNC connector]] inputs with1 MΩ impedance intended for external ×10 probes.
+It has a cable-attached, passive 16-channel probe, the [[P6450]], and outputs analog X/Y/Z signals for an external oscilloscope or X/Y monitor.  Alternatively, channels 0-3 can be switched to four [[BNC connector]] inputs with 1 MΩ impedance intended for external ×10 probes.
-The '''LA501W''' was a bundle of the LA501 with a [[WR501]] connected internally and providing word recognition trigger as well as data acquisition. In this case, there is no P6450 probe, instead one or two [[P6451]] probes can be attached to the WR501.
+The '''LA501W''' was a bundle of the LA501 with a [[WR501]] connected internally to provide word recognition trigger as well as data acquisition. In this case, there is no [[P6450]] probe; instead, one or two [[P6451]] probes are attached to the WR501.
+The LA501 provides only a timing diagram with clock tick marks on the traces, and analog zoom/pan controls for focusing on a particular trace or detail.
+Each channel can be positioned anywhere vertically to allow for timing comparisons.
 {{BeginSpecs}}
@@ Line 13: / Line 17: @@
 {{Spec | Sampling rate | up to 50 MHz (100 MHz @ 4ch) }}
 {{EndSpecs}}
+==Links==
+{{Documents|Link=LA501}}
 ==Pictures==
 <gallery>
+Tek la501 front3.jpg|LA501
 Tek la501 front.jpg|LA501
 Tek la501 w probe.jpg|LA501
 Tek dl502 wr501 la501w.jpg| [[DL502]], [[WR501]], and LA501W
+LA501W-TM515.jpg | LA501W (including WR501) with [[SC502]] scope in a [[TM515]] mainframe
+Tek la501 bc1.png
+Tek la501 bc2.png
+Tek la501 bc3.png | [[012-0725-01]] Clock Access Conversion Kit for the LA501W
 </gallery>
+==Components==
+{{Parts|LA501}}