067-0532-01: Difference between revisions

From TekWiki
Jump to navigation Jump to search
No edit summary
No edit summary
 
(7 intermediate revisions by 3 users not shown)
Line 1: Line 1:
[[File:067-0532-01 front.JPG|350px|thumb|right|Tektronix 067-0532-01 Constant Amplitude Signal Generator]]
{{Instrument Sidebar
|manufacturer=Tektronix
|model=067-0532-01
|class=Signal generator
|summary=500 MHz Constant-Amplitude Signal Generator
|image=067-0532-01 front.JPG
|caption=Tektronix 067-0532-01 Constant Amplitude Signal Generator
|series=
|introduced=1971
|discontinued=(?)
|manuals=
* [[Media:062-1176-00.pdf|Tektronix 067-0532-01 Manual (062-1176-00)]]
}}
The Tektronix '''Type 067-0532-01 Calibration Fixture''' is a constant amplitude signal generator whose output is a low-distortion sinewave.


The Tektronix '''Type 067-0532-01 Calibration Fixture''' is a '''Constant Amplitude Signal Generator''' whose output is a low-distortion sinewave.  It is intended to provide a signal of known frequency and amplitude for measuring oscilloscope bandwidth.   
It is intended to provide a signal of known frequency and amplitude for measuring oscilloscope bandwidth.   


A 3 MHz sinewave is available as a reference amplitude from which a -3 dB measurement can be made.  The output connector, amplitude detector, and 50 Ω source resistor are at the end of a 42 inch cable. The amplitude is regulated at the end of the cable adjacent to the [[GR-874 connector|GR-874 output connector]], thus essentially eliminating cable loss and standing-wave errors.
A 3 MHz sinewave is available as a reference amplitude from which a –3 dB measurement can be made.   
The output connector, amplitude detector, and 50 Ω source resistor are situated at the end of a 42 inch cable.  
Output amplitude is regulated at the end of the cable adjacent to the [[GR-874 connector|GR-874 output connector]], thus essentially eliminating cable loss and standing-wave errors.


{{BeginSpecs}}
{{BeginSpecs}}
 
{{Spec | Frequency range    | 65 MHz to 500 MHz}}
{{SpecGroup| Frequency}}
{{Spec | Frequency accuracy | ±2% of indicated frequency; 3 MHz output ±5%}}
{{Spec | Range | 65 MHz to 500 MHz}}
{{Spec | Amplitude range    | 0.5 V<sub>p-p</sub> to 4 V<sub>p-p</sub> into 50 Ω in 0.5 V<sub>p-p</sub> increments; variable between calibrated steps; max. output 4.2 V<sub>p-p</sub> }}
{{Spec | Accuracy | Within 2% of indicated frequency }}
{{Spec | Amplitude accuracy | 3 MHz ±2%, 65−300 MHz ±2%, 300−500 MHz ±5% }}
{{Spec | 3 MHz Frequency Accuracy | Within 5%}}
{{Spec | Output             | 50 Ω ±1%, via [[GR-874 connector]] }}
 
{{SpecGroup | Amplitude}}
{{Spec | Range | 0.5 V<sub>p-p</sub> to 4 V<sub>p-p</sub> into 50 Ω in 0.5 V increments}}
{{Spec | Variable | Continuously variable between calibrated steps. Max. output 4.2 V}}
{{Spec | 3 MHz Amplitude Accuracy | Within 2% of indicated amplitude}}
 
{{SpecGroup | Constant Amplitude Accuracy}}
{{Spec | 65 MHz to 300 MHz | Within 2% of indicated amplitude}}
{{Spec | 300 MHz to 500 MHz | Within 5% of indicated amplitude}}
{{Spec | Output Source Impedance | 50 Ω within 1%}}
{{EndSpecs}}
{{EndSpecs}}
==Manuals==
* [http://w140.com/tek_067-0532-01.pdf Tektronix 067-0532-01 Manual (PDF)]


==Pictures==
==Pictures==
<gallery>
<gallery>
File:067-0532-01 front.JPG                | Front View
067-0532-01 front.JPG                | Front view
File:067-0532-01 left.jpg                | Left Side
067-0532-01 left.jpg                | Left side
File:067-0532-01 top.jpg                  | Top Internal
067-0532-01 top.jpg                  | Top internal
File:067-0532-01 bottom.jpg              | Bottom Internal
067-0532-01 bottom.jpg              | Bottom internal
File:067-0532-01 left-in.jpg              | Left Internal
067-0532-01 left-in.jpg              | Left internal
File:067-0532-01 right.jpg                | Right Internal
067-0532-01 right.jpg                | Right internal
File:067-0532-01 signal gen circuit.JPG  | Signal Generator Circuit
067-0532-01 signal gen circuit.JPG  | Signal generator circuit
File:067-0532-01 line filter.JPG          | Line Filter Board
067-0532-01 line filter.JPG          | Line filter board
</gallery>
</gallery>




[[Category:Calibration fixtures]]
[[Category:Signal generators]]
[[Category:Signal generators]]

Latest revision as of 03:52, 12 June 2024

Tektronix 067-0532-01
500 MHz Constant-Amplitude Signal Generator
Tektronix 067-0532-01 Constant Amplitude Signal Generator

Produced from 1971 to (?)

Manuals
(All manuals in PDF format unless noted otherwise)
Manuals – Specifications – Links – Pictures

The Tektronix Type 067-0532-01 Calibration Fixture is a constant amplitude signal generator whose output is a low-distortion sinewave.

It is intended to provide a signal of known frequency and amplitude for measuring oscilloscope bandwidth.

A 3 MHz sinewave is available as a reference amplitude from which a –3 dB measurement can be made. The output connector, amplitude detector, and 50 Ω source resistor are situated at the end of a 42 inch cable. Output amplitude is regulated at the end of the cable adjacent to the GR-874 output connector, thus essentially eliminating cable loss and standing-wave errors.

Key Specifications

Frequency range 65 MHz to 500 MHz
Frequency accuracy ±2% of indicated frequency; 3 MHz output ±5%
Amplitude range 0.5 Vp-p to 4 Vp-p into 50 Ω in 0.5 Vp-p increments; variable between calibrated steps; max. output 4.2 Vp-p
Amplitude accuracy 3 MHz ±2%, 65−300 MHz ±2%, 300−500 MHz ±5%
Output 50 Ω ±1%, via GR-874 connector

Pictures

  • Front view

    Front view

  • Left side

    Left side

  • Top internal

    Top internal

  • Bottom internal

    Bottom internal

  • Left internal

    Left internal

  • Right internal

    Right internal

  • Signal generator circuit

    Signal generator circuit

  • Line filter board

    Line filter board

Retrieved from "https://w140.com/tekwiki/index.php?title=067-0532-01&oldid=94067"